AXK Series
| Bearing No. | AXK5578 |
| Inside Ø (mm): | 55 |
| Outside Ø (mm): | 78 |
| Width (mm): | 3 |
| Tolerance for inside-Ø (mm): | 0,00006/0,00036 |
| Tolerance for outside-Ø (mm): | -0,00045/-0,00015 |
| Tolerance for width (mm): | -0,00001/0 |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | oiled |
| Magnetic: | yes |
| Product weight: | 24 g |
>It consists of an axial cage assembly with integrated needle rollers
>It has a very low axial section height
>It has the capacity of supporting high axial forces in one direction
>The prerequisite for the use of the axial needle roller and cage assembly are hardened and ground running surfaces which can be used as a raceway
>Cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures
AXK Series
| Bearing No. | AXW10 |
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 27 |
| Width (mm): | 3.2 |
| Tolerance for inside-Ø (mm): | 0,175/0,025 |
| Tolerance for width (mm): | 0/-0,2 |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | oiled |
| Magnetic: | yes |
| Product weight: | 8,7 g |
>It can support high axial loads in one direction
>Suitable for a shock-resistant arrangement
>Small dimensions and therefore suitable for space-saving installation
>The flat housing locating washer is exactly centered in the housing bore due to the centering collar and thus facilitates the assembly
>In combination with radial needle roller bearings suitable for combined, radial and axial loads; fitting radial needle roller bearings can be found in the following table
Standard
| Product Offering | The Granville stablized high precision EMQ bearings in 10 serie for below OE industries | |
| Bore Size | 1mm and up to 50mm | |
| Closures | Open Non-contact metallic shields Non-contact seals Contact seals | 1 EM bearings for automobiles 2 EM bearings for air conditioners 3 EM bearings for industrial sewing machine 4 EM bearings for textile machines 5 Bearings for electric tools 6 EM bearings for general machinery 7 EM bearings for washers 8 EM bearings for vacuum cleaners 9 Bearings for banknote counters 10 EM bearings for cleanout machines |
| Ring Material | 100Cr6 52100 Gcr15 chrome steel 440C stainless steel 420C stainless steel | |
| Seal Material | Nitrile, Polyacrylic, Viton | |
| Retainer | Riveted steel, Crimped steel, Crowned steel, Crowned nylon | |
| Precision Class | ABEC-1 ABEC-3 ABEC-5 ABEC-7 | 01 Heat Treatment 02 Centerless Grinding Machine 11200 (most advanced) 03 Automatic Production Lines for Raceway 04 Automatic Production Lines for Raceway 05 Ultras onic Cleaning of Rings 06 Automatic Assembly 07 Ultras onic Cleaning of Bearings 08 Automatic Greasing, Seals Pres sing 09 Measurement of Bearing Vibration (Acceleration) 10 Measurement of Bearing Vibration (Speed) 11 Laser Marking 12Automatic Packing |
| Raidial Clearance | C2 C0 C3 C4 C5 | |
| Heat Stabilization | S0 S1 S2 S3 | |
| Quality Warranty | 9001:2008 | Advantage Manufacturing Processes and Quality Control |
| TS16949 | ||
Manufacturing Product Line
| Advantage Manufacturing Processes and Quality Control | |
| 01 | Heat Treatment |
| 02 | Centerless Gringing Machine 11200(most advanced) |
| 03 | Automatic Production Lines for Raceway |
| 04 | Automatic Production Lines for Raceway |
| 05 | Ultrasonic Cleaning of Rings |
| 06 | Automatic Assembly |
| 07 | Ultrasonic Cleaning of Bearings |
| 08 | Automatic Greasing,Seals Pressing |
| 09 | Measurement of Bearing Vibration(Acceleration) |
| 10 | Measurement of Bearing Vibration(speed) |
| 11 | Laser Marking |
| 12 | Automatic Packing |
Automatic Detecting and Sample Testing
| We strictly follow the core of quality management process control: | |
| APQP | product quality advance planning |
| SPC | Statistical process control |
| MSA | Measurement system analysis |
| FMEA | Analysis of potential failure modes and consequences |
| PPAP | Production part approval procedure |
Packing and Shipping
| Packing and Shipping | |
| Packing | Rust-Proof Oil Water-Proof Industrial Plastic Single Box Carton Pallet Container |
| Shipping | FOB Xiamen CIF By Express |
| Delivery Date | 30-60 Days |
More Choice
About Granville
The bearing manufacturer, GIL, a brand of Granville-group has been a leading global industrial supplier. To meet best needs of our clients and react timely according to the market demands, Granville integrates the design, research, manufacture and business activities. The whole business oriented to major foreign market by Xiamen Granville Mechanical & Electrical Co., Ltd. From manufacturing to innovation to improvement, we are your trustworthy partner in the aspect of new transmission solution.
We Manufacturing:
The Granville manufacture takes her every effort in purchasing the most advanced bearing process equipment, automatic facilities are widely used in the factory and we are keep investing to improve more.
Levels Applications Materials:
We manufacture GIL bearings, advantage in manufacturing electric motor quality deep groove ball bearings up to ABEC-3, Z3-V3, ABEC-5 Z4-V4 level; A reliable production resource of high quality repair parts for the aftermarket operations of automotive and light truck manufacturers worldwide, over 1000 kits includes hub assemblies and three generations of wheel bearing designs; Granville foundry make an extensive and full line of mounted bearing units and housings in industry standard and custom configurations. Casting iron, ductile iron, stainless steel, plastic materials available.
Partnerships Reliable Supply-Chain:
Based on our experienced team and strict, effective supply chain management, Granville products deliver premium quality, and performance our customers have relied on for years. From a full range of bearings, mounted bearing units, power transmission products and related markets around the world, we provide the industry's most comprehensive range of qualified products available today.
We strictly follow the core of quality management process control:
✓ APQP: product quality advance planning
✓ SPC: Statistical process control
✓ MSA: Measurement system analysis
✓ FMEA: Analysis of potential failure modes and consequences
