HANGCHA A Series Stand-on Reach Truck 1.5-1.8t
Comfort
Optimal ergonomic design. the steering wheel, operating lever and accelerator are positioned at the best distance to the driver, making the operation lighter more comfortable.
The newly designed large-area back support is soft and comfortable, reducing operator fatigue.
Safety
Turn speed is controlled to the turning radius, providing stable turning matched to the state of operation.
If the operator is not in the normal operating position, travel power is interrupted and load-handling (except lowering) operations are stopped.
The right leg of the OHG moves backwards to protect the driver's back in case of a collision.
Reliability
The Curtis controller and CAN-bus communication provide safe and reliable.
The Shimadzu multi-way valve and gear pump provide higher efficiency and faster lifting speed.
EPS system with brushless technology making steering and operation easier and clearer.
Stability
Suspension control system effectively reduces the shake when turning,lifting and moving forward and backward.
The pump motor assembling on the rear side of the body makes the center of gravity moving backwards and improving stability.
Automatic speed control: Travel speed is controlled according to the lift height, providing stability and safety.
Maintenance
Battery reach out system is easy for change the battery.
The controller and multi-way valve are located on the front side of the body, and it's only necessary to open the front sealing plate during maintenance.
Energy saving and efficient
The hydraulic system has been optimized to improve the lifting performance. The lifting speed was increased by 23% without load, and the lifting speed was increased by 22% with full load.
The excellent climbing performance increases the climbing performance by 48% without load and climbing performance by 15% with full load.
| Model | CQD16 | |||
| Performance | Maximum load capacity | Q | kg | 1600 |
| with load center at | C | mm | 600 | |
| Maximum lifting height | H3 | mm | 3000 | |
| Reach length | E | mm | 580 | |
| Tiltiing angle (up/down) | α/β | 4/2° | ||
| Travel speed (without load) | km/h | 6 | ||
| Travel speed (with load) | km/h | 6 | ||
| Lifting speed (without load) | mm/s | 160 | ||
| Lifting speed (with load) | mm/s | 120 | ||
| Ascend slope ability (without load ) | % | 8 | ||
| Ascend slope ability (with load ) | % | 5 | ||
| Weight (without battery) | kg | 1750 | ||
| Dimensions | Overall length of frame(mast no reach) | L | mm | 2245 |
| Overall length (mast no reach) | L1 | mm | 2765 | |
| Overall length (mast reach) | L2 | mm | 3320 | |
| Overall width of frame | B | mm | 1030 | |
| Overhead guard height | mm | / | ||
| Mast lowered height | H1 | mm | 2040 | |
| Max height(mast lifted with backrest) | H2 | mm | 3855 | |
| Wheelbase | Y | mm | 1412 | |
| Fork length | mm | 1070 | ||
| Fork width | e | mm | 100 | |
| Fork lowered height | S | mm | 40 | |
| Fork spread width | mm | 225-740 | ||
| Min frounf height | m1 | mm | 52 | |
| Turning radius | Wa | mm | 1690 | |
| Min intersecting aisle width | Ast | mm | 2790 | |
| Tire | Front wheel | mm | ∅210*85 | |
| Drive wheel | mm | ∅230*75 | ||
| Caster wheel | mm | ∅115*55 | ||
| Wheel material | polyurethane | |||
| Electrical components | Drive motor type | AC series motor | ||
| Rated output | kw | 1.5 | ||
| Hoist motor type | DC series motor | |||
| Rated output | kw | 3 | ||
| battery | Voltage | V | 24 | |
| Capacity | AH | 240 | ||
| Weight | kg | 233 | ||
OUR SERVICE
1)Professional fast response mechanical engineers and electrical engineers provide suitable solution method for you all around the world.
2)Engineers available to reach machinery overseas job site at any time required.
3) Technical Support of installation/training supplied to help customers to earn most profits with our machinery.
4) All variety of spare parts available to support the customer 24h*7days for the daily maintenance/repair purpose etc.
OUR PRICE
We work as the leading VIP dealers of various famous Chinese construction machinery manufacturers and are constantly treated with best price policy which is only provided to special internal high level permission.From numerous comparison and feedback from clients.Our price is always more competitive and much favorable than the customer buy directly from manufacturers.
| FAQ 1: What kind terms of payment can be accepted? A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted 2: What certificates are available in Machinery? A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC, 3: What about the delivery time? A: 7-20 days after receiving the deposit. 4: What about the warranty time? A: 12 months after shipment or 2000 working hours, whichever occuts first. 5. What about the Minimum Order Quantity? A: The MOQ is 1 pcs |
