FUNCTIONAL AND FEATURE
1, Pressure Resistance: The parking lock shall endure a pressure of 500kg without damage under declining condition.
2, Self locking: The parking lock can not be distorted permanently by external force except by the owner.
3, Manual Operation: Handily operate the rocker up and down to take out the batery for recharging or replacing.
4, Sealing: The IP protection grade is 65, which can fully prevent the dust and the lock can be rinsed with water without causing any damage.
5, Power-off on resistance: The power will be automatic switched off on external forces unaffordable in the lifting/declining of parking lock to protect the electrical motor from being damaged.
6, Power shortage indication: When the power storage is not enough to start the parking lock, the luminotron on the parking lock will flicker for three times to remind the people to recharge the battery in time.
7, Reset after the alarm on external force: If the parking lock is forced to decline in lifting status, the front/back angle of the rocker will change under the external force. and the parking lock will alarm to remind the extemal force applier to remove external force or remind the managerial staff to make treatment. The rocker will resct automatically after 5~10 seconds.
Remark: Do not keep the alarm long under alarming mode, or the control panel shall be damaged easily.
8. Reset after the removal of external force: When the external force is removed, the internal mechanisms will reset the rocker declined by external force automatically and quickly. So please mind the safety.
9, Theft protection: The position of the foundation for parking lock and ground installation shall be out of the large external cover. The cover can be opened with key by users only. Thus the theft protection method is applied.
