Top brand Heli forklift CPCD30 3 ton diesel forklift hydraulic oil
Feature of CPCD30 3 ton HELI Forklift :
This new series forklift trucks that made with the latest technical design provide you excellent operating performance. HELI forklift trucks high standard performance, comfortable driving experience and the simple and safe operation will make your work handier.
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in case of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug
Parameter of CPCD30 3 ton HELI Forklift :
| Model | CPCD30 | ||
| Power type | Diesel | ||
| Rated capacity | kg | 3000 | |
| Load center | mm | 500 | |
| Lift height | mm | 4500 | |
| Free lift height | mm | 145 | |
| Fork size | mm | 1220×125×45 | |
| Mast tilt angle | deg | 6/12 | |
| Front overhang | mm | 482 | |
Overall | Length to face of forklift | mm | 2695 |
| Overall width | mm | 1225 | |
| Mast lowerd height | mm | 2070 | |
| Mast extended height | mm | 4250 | |
| Overhead guard height | mm | 2090 | |
| Turning radius | mm | 2420 | |
| Min.right angle aisle width | mm | 2885 | |
Speeds | Drive speeds | km/h | 18/19.5 |
| Lifting speeds | mm/s | 470/520 | |
| Lowering speeds | mm/s | ≤600 | |
| Max.grade ability | % | 15 | |
| Total weight | kg | 4350 | |
Tires | Frot | 28*9-12PR | |
| Rear | 6.5-10-10PR | ||
| Wheeslbase | mm | 1700 | |
Tread | Front | mm | 1000 |
| Rear | mm | 970 | |
| Hold under mast | mm | 110 | |
Engine | Model | Xinchang 490BPG | |
| Rated output | kw/rpm | 37/2650 | |
| Rated torque | N.m/rpm | 148/2000 | |
| No.of cylinder | 4 | ||
| Displacement | L | 2.54 | |
| Fuel tank capacity | L | 52 | |
