New Chinese Wholesale 1 Year Warranty Forklift
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in case of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug.
| Model | CP(Q)Y35 | CP(Q)YD35 | |||||
| Power Type | Gasoline or LPG | ||||||
| Rated Capacity | kg | 3500 | |||||
| Load Center | mm | 500 | |||||
| Overall max.lifting height(with backrest) | h4 | mm | 4262 | ||||
| Max.Lifting height | h3 | mm | 3000 | ||||
| Height mast retracted(upright) | h1 | mm | 2180 | ||||
| Free lift height | h2 | mm | 170 | ||||
| Backrest height(from upper face of forks) | h8 | mm | 1222 | ||||
| Overall height(overhead guard) | h6 | mm | 2190 | ||||
| Front overhang | X | mm | 498 | ||||
| Rear overhang | L4 | mm | 495 | ||||
| Wheel base | L5 | mm | 1700 | ||||
| Coupler height | h5 | mm | 310 | ||||
| Min.groud clearance under mast | m1 | mm | 135 | ||||
| Overall width | B | mm | 1225 | ||||
| Tread(front) | (S/P) | mm | 1000/970 | ||||
| Inside turning radius | Wa | mm | 2420 | ||||
| Min.intersecting aisle | Ra | mm | 2400 | ||||
| Fork Size | axbxc | mm | 1070*125*50 | ||||
