ISU-ZU Medical waste transfer vehicle is also known as medical waste shipping vehicle, medical waste transport vehicle, medical waste collection vehicle, medical waste transfer vehicle, etc.
The box body adopts closed transportation, the back door is double-layer closed structure, and labyrinth sealing strip is used to completely seal the car, so as to prevent the diffusion of medical waste bacteria and toxic gas; the inside wall plate of the truck adopts stainless steel plate, which can be disinfected by corrosive disinfection, the bottom of the car and the corner are smooth, and the dead corner should be cleaned for disinfection. The vehicle compartment has the function of ultraviolet disinfection and sterilization. When the UV lamp works normally, it radiates a large amount of 253.7nm UV, which has a very strong killing power to microorganisms, killing bacteria within 30-45 minutes. The temperature of the refrigerator is controlled by the sealing, anti-seepage, dustproof and other properties of the product. For the selection of the refrigeration unit, the medical waste transfer vehicle must be transported at low temperature, so the medical waste transfer car is equipped with a refrigeration unit. The medical waste transport vehicle has the functions of antibacterial, flame retardant, corrosion-resistant, easy to clean and disinfect, etc. It is the more convenient vehicle for the collection and distribution of medical waste in small, medium-sized and big hospitals.
[Main technical parameters] | |||
Total mass (kg) | 4495 | Tank volume (m3) |
|
Rated mass (kg) | 1355 | Overall size (mm) | 5995x2140x3110 |
Cube weight (kg) | 3010 | Cargo size (mm) | 4180x1980x2000 |
Approach/departure Angle (°) | 20/14 | Front/rear suspension (mm) | 1015/1620 |
Number of axes | 2 | Wheelbase (mm) | 3360 |
Axles load(Kg) | 1805/2690 | Max speed (Km/h) | 80 |
Comments | 1. The top of the carriage is closed and cannot be opened; 2. Optional side door; 3. Side protective material :Q235A carbon steel, rear protective material :Q235A carbon steel, welded connection with rear frame, and rear protective section size :100 x 50(mm); Height from ground :450mm; 4. Optional installation of new front lamps (front high lamp, front near-light lamp, front position lamp, front turn lamp, side turn lamp), new grille, new front panel and widened front bumper. | ||
[Chassis technical parameters] | |||
Overall dimensions (mm) | 5900×1860×2180 | Number of tires | 6 |
Approach/departure Angle (°) | 24/16 | Tire size | 7.00R16 8PR |
Number of leaf springs | 8/6+5,4/3+2 | Front track(mm) | 1385,1504 |
Fuel type | diesel | Rear track(mm) | 1425 |
Emission standards | Euro V | ||
Engine model | Engine manufacturer | Displacement(ml) | Power(Kw) |
| 4KH1CN5LS | Qingling isu-zu (chongqing) engine co. LTD | 2771 | 72 |
