Model NO.
HYEG--01
The Vehicle Inlet and Outlet
Up
Design
Single Post
Certification
CE
Lift Mode
Combination
Voltage
220V
Transport Package
8 Cartons Packed on 1 Wooden Pallet
Specification
6m
Trademark
HONGYI
Origin
China
HS Code
8431310090
Production Capacity
10000 Set/Sets Per Month
After-sales Service:
Yes
Warranty:
Yes
Type:
Parking Lift
Working Mode:
Car Ride
Driving:
Hydraulic
Falling Prevention Device:
Shaft
Products Description
Product Name | Parking Boom Barrier |
Voltage | 220 ~ 240V |
Power | 90W |
Arm length | 1 ~ 6 meters |
Arm Gate Material | Aluminum Alloy |
Size of Housing | 405 * 292 * 1019 mm |
Housing Material | Galvanized Plate |
Rail Lifting Time | 6 seconds |
Working Temperature | -25 °C ~ 80 °C |
Working Humidity | 5% ~ 95% |
Warranty | 1 Year |
Model: (AC) Motor
Power supply: 220VAC 50HZ / 110VAC 60HZ
Motor's power: 90W 220VAC
Max length of boom: 6m
Time for up/down: 3S( for 1~3m),6S( for 4~6m)
Environment temperature: -20oC-50oC
Protection class: IP55
Input terminals:
Photocell, Air wave switch, Loop detector, Toll gate system.
Output terminals:
Motor, Lamp
Model:(DC) Motor
Power supply: 220VAC 50HZ / 110VAC 60HZ
Motor's power: 80W 24VDC
Max length of boom: 6m
Time for up/down: 3S( for 1~3m),6S( for 4~6m)
Environment temperature: -20oC-50oC
Protection class: IP55
Input terminals:
Photocell, Air wave switch, Loop detector, Back-up battery, Toll gate system.
Output terminals:
Motor, Lamp
Functions:
Reverse when meet obstacle.
Force of opening and Closing in adjustable.
Features:
1.-The traffic barrier is widely used for the facilities of parking, traffic or toll system.
2.-Arms can be chosen from 3 meters to 6 meters.
3.-This type of barrier could match with direct boom( pole), fold boom Or fence boom..
4.-Advanced manual release .Clutch key can be used to open the clutch when electricity is cut off.
5.-All the process is soft without any noise and shaking.
6.-This barrier gate has many input terminals for photocell, Airwave switch, loop detector, back-up battery(for DC Motor), toll gate system and output terminals for lamp.
7.-Housing color: yellow,red ,blue,orange,white (optional)
8.-Boom arm direction can be chosen leftward to rightward.
9.-Auto warming up,suitable for cold environment.
10-Controlling way :wireless or wiring multiple push button for OPEN,CLOSE,STOP function.
2.-Arms can be chosen from 3 meters to 6 meters.
3.-This type of barrier could match with direct boom( pole), fold boom Or fence boom..
4.-Advanced manual release .Clutch key can be used to open the clutch when electricity is cut off.
5.-All the process is soft without any noise and shaking.
6.-This barrier gate has many input terminals for photocell, Airwave switch, loop detector, back-up battery(for DC Motor), toll gate system and output terminals for lamp.
7.-Housing color: yellow,red ,blue,orange,white (optional)
8.-Boom arm direction can be chosen leftward to rightward.
9.-Auto warming up,suitable for cold environment.
10-Controlling way :wireless or wiring multiple push button for OPEN,CLOSE,STOP function.
remote control parking barrier trouble shooting
Number | Trouble | Cause | Shooting |
1 | Motor of Barrier does not work | 1,No power supply | 1,Check power supply |
2,Break fuse | 2,Change fuse | ||
3,Motor is damaged | 3,Change the motor | ||
2 | Barrier can open but can not close | 1,Photocell is not connected properly | 1,Connect the photocell |
2,Photocell beam is block off | 2,Clear out obstacle | ||
3,Photocell is broken | 3,Change a new device | ||
3 | Barrier can open (close) but can not close (open) | 1,Position of limit switch is not correct | 1,Adjust position |
2,Limit switch is damaged | 2,Change limit switch | ||
4 | Barrier can not locate accurately | 1,Distance of limit switch is too large | 1,Adjust position of limit switch |
2,Limit switch is wrong | 2,Change limit switch | ||
3,Magnetic-stell's position is wrong | 3,Re-adjust the position | ||
5 | Release device of Barrier is doesn't work | 1,Operating handle is broken | 1,Change the handle |
2,Worm gears are jammed | 2,Rotate the pinion | ||
6 | Push the "OPEN" button but the Barrier gate close | Whether "+MOTOR-" wires are connected wrong | Connect correctly according to wiring diagram |
7 | Motor of Barrier can work but boom can not work | Compression spring of clutch is dead | Change the spring |
Send Message
