Model NO.
UCS20/AC
Design
two post
Certification
CE, ISO, CCC
Lift Mode
Hydraulic Cylinder
Voltage
220V
Power Supply/Motor Capacity
220V/380V, 50Hz/60Hz, 1pH/3pH, 2.2Kw
Transport Package
Steel Pallets+ Air Bubbles Plastic Wrapping+ Strap
Specification
2.0/2.5 Tons
Trademark
GG LIFTERS
Origin
Qingdao, China
HS Code
84289020
Production Capacity
100pieces/Month
Warranty:
2 years against manufacturing defects
Type:
Parking Lift
Working Mode:
Manual
Driving:
Motor
Falling Prevention Device:
Pull-Type
The Vehicle Inlet and Outlet:
Down
PIT CAR PARKING SYSTEM
New Type Pit vertical car parking system for home yard
New Type Pit vertical car parking system for home yard
- Hydraulic driven through 2 ea hydraulic cylinders system.
- Flexible design according to customer requirements, suitable for residential & commercial use.
- Directly park or pick up the car at any level independently.
- Simple steel structure, easy for installation and maintenance.
- Cantilever supports with 2 posts together with longitudinal & cross beams to keep balance.
- Hydraulic balance system to ensure balance of both cylinders.
- Galvanized wave plates for upper & lower platforms of all units.
- Front and back wave plates are removable for easy access to the pit ground floor in case of emergency.
- Tire stoppers in each platform to ensure correct placement of the car.
- 1 ea limit switch in every level to stop platforms at predefined heights, IP 67.
- Electric operation box is equipped with dead man Push Buttons (UP/Down),
- Electric Operation Box is operated by 24 V to protect against short circuit.
- Hydraulic power unit will be fixed according to site location.
- Units are designed and built according to EN1493: 2010 and EN14010: 2003 standards.
- Steel parts are hot dipped galvanized to ensure long life and avoid rust.
Send Message
