Model NO.
IDL-T20
Driving
Dragging
Falling Prevention Device
Pull-Type
The Vehicle Inlet and Outlet
Center
Design
Single Post
Certification
CE
Lift Mode
Combination
Voltage
220V
Name
High Quality Vehicle Loop Detector for Car Parking
Supply Voltage AC
220V, 110V, 24V, 12V
Supply Voltage DC
24V, 12V
Sensitivity
Adjustable in 3 Increments (High .Medium. Low)
Operating Temperature
-25 to +70 Degree
Storage Temperature
-40 to +85 Degree
Frequency Range
20 kHz to 200 kHz
Shipment
by Air DHL,UPS,FedEx,TNT,by Sea,etc.
Transport Package
Standard Neutral Package or Customers Requirement
Specification
CE, Rohs
Trademark
IDL
Origin
China
HS Code
847190
Production Capacity
10000 Set / Month
Warranty:
at Least 1 Year
Type:
Parking Sensor
Working Mode:
Car Ride
1. Introduction
It is the vehicle loop detector of inductive coil type. The principle is that the vehicle's metal parts can change the inductance value of the detection coil and after analyzed by the microcontroller. It can detect whether the vehicle is present. It is mainly applied to electric door, fast door, barrier gate and occasions that need to detect the vehicle's presence.
2. Technical Parameter
1) Supply Voltage: 12V AC/DC±10% 24V AC/DC±10%
115V AC±10% 230V AC±10%;
2) Power Consumption: <2VA;
3) Relay Output: 7A/250VAC;
4) Frequency Range: 20KHz to 200KHz;
5) Reaction Time: Single channel 50mS;
6) Signal Holding Time: Unlimited (factory default) or customized;
7) Sensitivity: 0.01% to 0.1%, adjustable in three levels;
8) Loop Inductance: Limit value 40uH to 1000uH; Ideal value 80uH to 300uH;
9) Loop Connection Wiring: Within 10 meters, total resistance is less than 10Ω, twisted 20 times per meter;
10) Operating Temperature: -25ºC to 70ºC;
11) Storage Temperature: -40ºC to 85ºC;
12) Relative Humidity: <90 without condensation;
13) Temperature Compensation: Automatic compensation up to 50ºC/H;
14) Connection Type: 11 pin DIN rail socket;
15) Dimension: 41*78*85MM;
16) Protection Level: IP30;
17) Electromagnetic Compatibility (EMC): In accordance with EN50081-1 and EN50082-2.
It is the vehicle loop detector of inductive coil type. The principle is that the vehicle's metal parts can change the inductance value of the detection coil and after analyzed by the microcontroller. It can detect whether the vehicle is present. It is mainly applied to electric door, fast door, barrier gate and occasions that need to detect the vehicle's presence.
2. Technical Parameter
1) Supply Voltage: 12V AC/DC±10% 24V AC/DC±10%
115V AC±10% 230V AC±10%;
2) Power Consumption: <2VA;
3) Relay Output: 7A/250VAC;
4) Frequency Range: 20KHz to 200KHz;
5) Reaction Time: Single channel 50mS;
6) Signal Holding Time: Unlimited (factory default) or customized;
7) Sensitivity: 0.01% to 0.1%, adjustable in three levels;
8) Loop Inductance: Limit value 40uH to 1000uH; Ideal value 80uH to 300uH;
9) Loop Connection Wiring: Within 10 meters, total resistance is less than 10Ω, twisted 20 times per meter;
10) Operating Temperature: -25ºC to 70ºC;
11) Storage Temperature: -40ºC to 85ºC;
12) Relative Humidity: <90 without condensation;
13) Temperature Compensation: Automatic compensation up to 50ºC/H;
14) Connection Type: 11 pin DIN rail socket;
15) Dimension: 41*78*85MM;
16) Protection Level: IP30;
17) Electromagnetic Compatibility (EMC): In accordance with EN50081-1 and EN50082-2.
Send Message
