Model NO.
FPT
The Vehicle Inlet and Outlet
Up
Design
Four Post
Certification
CE, ISO, CCC
Lift Mode
Hydraulic Cylinder
Voltage
110V 220V 380V 440V
Load Capacity
1-5ton
Lifting Height
1-10m
Color
Blue, Grey, Red...Customized
Lifting Method
Hydraulic
Lifting Speed
4-6m/Min
Material
High Strength Steel
Frequency
50Hz/60Hz
Guardrail Height
1.1m
Surface Treatment
Painting
Safety Precaution 1
Anti Explosion Valve
Safety Precaution 2
Emergency Stop
Safety Precaution 3
Dual Chain System
Certifications
CE ISO9001
Control
Control Box + Control Panel
Transport Package
Plastic Film
Trademark
PLK LIFT
Origin
China
HS Code
8428909090
Production Capacity
3000
After-sales Service:
Online Service, Free Express Accessories.
Warranty:
12 Months
Type:
Parking Lift
Working Mode:
Car Ride
Driving:
Hydraulic
Falling Prevention Device:
Pneumatic Insurance
2ton 3ton Cheap Electric Car Lift for 4S Shops
| No. | Structure | Material name | Specification | Origin |
| 1 | Body materials | Stand column | Steel plate cold bending Q235 | Jinan |
| 2 | Lifting beam | 14# Channel steel Q235 | Jinan | |
| 3 | The move beam | Transmission beam 120*150*8 square tube Q235 | Wuxi | |
| 4 | Chassis | Channel steel 14, 10 and 8 made of Q235 | Jinan | |
| 5 | Motor | 4KW | Wuxi | |
| 6 | Chain | Plate chain LH1266, 146K tensile strength of 6*6 | Qingdao | |
| 7 | Oil Pump station | 18MPa pressure | Wuxi | |
| 8 | Hydraulic system | Hydraulic Cylinders | diameter 110mm | Qingdao |
| 9 | Sealing elements | 70*90*10 80*90*6 | Germany | |
| 10 | High pressure piping | High pressure rubber | Qingdao | |
| 11 | Supporting valve | |||
| 12 | Electric control | Alarm Bell | ||
| 13 | Limit switches | YBLX-K3-20X/T | ||
| 14 | Micro Switch | |||
Advantage:
1.The lifting platform adopts a through-type design, so that the car can smoothly enter and exit without reversing in and out.
2.The loading platform is made of rectangular tube and channel steel. The table is paved with a tread plate. The sides of the platform are provided
with a high 700 fence welded with square tubes.
3.The lifting adopts high-quality chain and double-chain lifting insurance. The chain model LH1266 has a safety factor greater than 7 times, safe
and reliable, and meets the requirements of GB/T8918-188.
4.The hydraulic system uses high-quality domestic oil pump and control components to ensure the service life and stability of the hydraulic station.
5.The electrical parts are made of domestic Zhengtai electrical components, and electrical control boxes are provided on each floor.
6.The lift has a special pneumatic safety device, which can safely lock at any working point, and it is convenient to get on and off without shaking.
7.The lift has a top dead center travel limit device that automatically stops when it reaches the maximum height.
8.The elevator rises and falls, the operation is synchronized, the speed is stable, and there is no abnormal noise and vibration creep.
9.The lift controller is equipped with an electrical control component with overload and phase failure, and the insulation resistance is less than 5
megohms.
10.Set operation buttons on each floor and lifting platform to achieve multi-point control.
11.An alarm bell is provided before the equipment is running to remind people around the lift.
12. The appearance of the equipment is smooth and flat, and the paint surface is strong and beautiful.
Contact Information:
Sarah (Sales manager)
Jinan PLK Machinery Co., Ltd
Add: No. 6, Huixin Road, Jiyang County, Shandong, China
URL: plklift.en.made-in-china.com
All our products are CE certificated, good quality and competitive price. Welcome to send the inquiry to us if you are interested in any of them, and we will reply you ASAP.
Send Message
