Model NO.
GGJ5070ZXXE5
Models
Large
Usage
Dump, Swing Arm Type, Sealed, Hang Barrel Type, Arm Type, Compression Type, Eat Hutch Type
Condition
New
Trademark
Aerosun SanLi
Origin
China
Type:
Compactor
Certification:
ISO9000, CCC
Volume:
3001-6000L
Emission Standard:
Euro 5
Transmission Type:
Automatic
Fuel:
Diesel
Aerosun 4cbm GGJ5070ZXXE5 arm type detachable container garbage truck
Aerosun GGJ5070ZXXE5 arm type detachable container garbage compactor is developed on the basis of ensuring the technical performance of JX1073TB25 type chassis, which provides an effective means for collecting urban household garbage in residential areas, streets and other places and sending it to garbage transfer stations. This vehicle can be equipped with mobile compression container, docking compression container, and bulk bins. The mobile compression container can be used independently (380V power is needed). The tank body has the function of compressing garbage, which can be placed in the residential area and used as a garbage collection container. The docking compression container is used in conjunction with the garbage compression station. The push head of the compression station compresses the garbage. The tank body itself does not have compression function. The operating requirement of bulk waste is low and can be placed directly in residential areas or other garbage collection points. When the bins are full, vehicles transport it to waste transfer stations or landfills for disposal. The truck adopts hydraulic control, and the way of garbage discharging is backward dumping. The hydraulic system consists of two double-acting lifting cylinders, one double-acting locking cylinder, one double-acting telescopic cylinder, one double-acting leg cylinder, oil pump, multi-channel reversing valve and high-pressure rubber hose, etc.
It is strictly prohibited to collect construction waste and hard industrial metal waste.
1.Main Technical Specifications
| Model | CGJ5070ZXXE5 | ||||||
| General Parameters | Overall dimensions (L×W×H)(mm) | 4995×1962×2206 | |||||
| GVW(kg) | 7320 | ||||||
| Curb weight (kg) | 3035 | ||||||
| Rated weight (kg) | 4090 | ||||||
| Front overhang/ rear overhang (mm) | 1125/1760 | ||||||
| Approach/departure angle (°) | 19/24 | ||||||
| Min. turning diameter (m) | 12 | ||||||
| Chassis | Model | JX1073TB25 | |||||
| Manufacturer | JMC | ||||||
| Axis/axle base(mm) | 2/2750 | ||||||
| Tyre size | 7.00R16 | ||||||
| Engine | Model | JX4D30A5H | |||||
| Power(kw) | 112 | ||||||
| Fuel type/emission standards | Diesel/Euro V | ||||||
| Max. speed(km/h) | 80 | ||||||
| Special parameters | Time of container going aboard(s) | 35 | |||||
| Time of container getting downing(s) | 45 | ||||||
| Discharge time of container(s) | 50 | ||||||
| Max. angle of uplift | 45° | ||||||
| Working pressure of hydraulic system (MPa) | 16 | ||||||
2. Advantages and Characteristics
2.1 With good versatility and interchangeability, one truck can be matched with several garbage transfer stations, and garbage containers can be used for each other, effectively improving garbage transfer efficiency and reducing transportation costs;
2.2 No secondary pollution in transportation, small floor space, saving civil construction investment, no need for additional lifting equipment;
2.3 The arm is made of high strength wear-resisting steel, the equipment is strong and durable, and the service life is long.
2.4 Light dead weight and high lifting capacity.
2.5 Safety system includes: load balance valve, hydraulic or mechanical tank body lock device, tilt lock device, good tilt lock stability.
2.6 Operation mode: Each action of the pull arm can be realized by operating the air control valve in the cab.
2.7 High reliability products are selected for hydraulic components, among which high pressure plunger pump is imported.
Send Message
