Model NO.
MT1108KJ
Transmission Type
Manual
Payload
6ton
Fuel
Diesel
Drive Wheel
4×2
Brand
Japan Brand
Models
Medium
Usage
Compression Type
Condition
New
Truck Model
8m3 Compactor Garbage Truck
Engine Model
4HK1-Tcg40
Horsepower
190HP
Transmission
Mld, 6 Gears Frowards and 1 Reverse.
Tyre
8.25-20-14pr Nylon Tire
Max Speed
85km/H
Operation
PLC Automatic Operation, with Manual Operation
Delivery
Within 40 Days
Transport Package
Roro, Bulk Vessel or Frame Container
Specification
I-SUZU 8M3 Compactor Garbage Truck
Trademark
FUYA
Origin
China
HS Code
8704223000
Production Capacity
200units Per Month
After-sales Service:
24 Hours Online
Warranty:
1 Year
Type:
Compactor
Certification:
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Volume:
8m3
Emission Standard:
Euro IV/V/VI
Product Description:
HUBEI FUYA VEHICLE CO.,LTD
I. Details of Japan brand 8 Cubic meter 8m3 Compression Garbage Truck I-SUZU 7 Tons Compactor Garbage Truck
[Function introduction of compressed garbage truck]:
1. Compressed garbage truck, also known as after-loading compressed garbage truck, is a new type of sanitation vehicle that collects and transfers garbage to avoid secondary pollution. The after-loading filler is used to dock with the trash can or the trash hopper, and they are combined into a mobile garbage transfer station to realize the pollution-free collection and removal of garbage in one vehicle and multiple buckets. Effectively prevent secondary pollution caused by sc attering and flying during collection and transportation.
2.Garbage compactor Truck (also called Compactor garbage truck,Compression garbage truck, waste compactor truck, garbage compactor truck, trash compactor, refuse collection truck, compactor garbage truck,rubbish truck, bin wagon, dustcart, bin lorry, waste collection vehicle) is designed to collect and transport municipal solid waste.
3. Combined control of gas, electricity and hydraulic pressure. The vehicle's control system comprehensively utilizes the advantages of electric control, air control and hydraulic control. The air control system is controlled by the electronic control system, and the operation of the hydraulic valve group is controlled by the air control system, which improves the reliability and efficiency of use.
4. Advanced electronic control system. Using PLC (programmable controller) integrated control, the control circuit is generated in the PLC, and the logic loop is adopted to ensure that the operation instructions are executed in order, and at the same time to ensure that the operation instructions are interlocked, and only external wiring is connected, which reduces the occurrence of failures, To avoid accidents caused by misoperation and improve reliability;
5. Hydraulic lifting safety circuit. In the hydraulic system of the lift loader, a one-way balance valve is set. The valve not only guarantees the steady lowering of the filler, but also cuts off the direct connection between the lifting cylinder and the hydraulic oil pipe. Even if the oil pipe bursts, the filler will not fall suddenly, which improves the safety of use.
5. The compressed garbage truck is in a closed state during compression, filling and transportation. A unique drain valve is installed on the sewage tank, which is reliable in sealing and not easy to be blocked. The optional filler completely covers the feeding port of the filler, eliminating the phenomenon of flying garbage and dust caused by the disturbance of the tail air flow during the transfer process, and the appearance is more beautiful.
Features:
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turn over mechanism,can also choose ground hopper and other kinds of loading mechanism.
Structure Picture Of the I-SUZU Compactor Garbage Truck:
Picture of the I-SUZU 8cbm 8m3 8000liters Compactor Garbage Truck:
II. Technical data of Japan brand 8 Cubic meter Compression Garbage Truck I-SUZU 7 Tons Compactor Garbage Truck
| Vehicle parameters | |||
| Vehicle Model | FY51100 | Vehicle Brand | FUYA |
| Overall dimensions | 8455X2480X3340mm | Curb weight | 10100kg |
| Loading capacity | 8m3 | ||
| Chassis parameters | |||||
| Chassis model | QL11009MARY | Chassis brand | I-SUZU | ||
| Overall dimensions | 7930x2170x2330mm | Wheel base | 4175mm | ||
| Front/rear wheel track | 1680/1650mm | Front/rear suspension | 1110/2345mm | ||
| Approach/departure angle | 21/11° | Maximum speed | 110km/h | ||
| Chassis Manufacturer | QingLing Motors (Group) Co., Ltd. | ||||
| Cab | Configuration | 700P, single row cab,allowable 3 passengers,air conditioner, USB radio interface,cab can be flipped. | |||
| Color | White,other color is optional | ||||
| Engine | Model | 4HK1-TCG40 | |||
| Emission | Euro 4 | ||||
| Type | 4 cylinders, 4 valve, 4-stroke, in-line, common rail, precision electronic control, multistage injection, optimal combustion, exhaust gas recirculation, diesel engine. | ||||
| Rated power | 190hp | ||||
| Displacement | 5193ml | ||||
| Manufacturer | I-suzu (ChongQing) Engine Co., Ltd. | ||||
| Tire | Size | 8.25-20-14PR nylon tire | |||
| Number | 6+1 nos | ||||
| Frame | 216x70(6+3)mm | ||||
| Front axle | 4.0tons | ||||
| Rear axle | 7.0 tons | ||||
| Drive form | 4×2 | ||||
| Suspension | Multi leaf springs | ||||
| Rated voltage | 24V,DC | ||||
| Transmissions | Is-uzu MLD six speed transmission,6 speed forward 1 reverse. | ||||
| Steering device | Power assisted steering | ||||
| Steering wheel | Left hand drive | ||||
| Selective configuration | Tire:825R16,825-20,825R20,235/75R17.5 | ||||
| If there is a slight change in the chassis parameters above,please take the actual product as the standard | |||||
| Upper-Body specific ation | |
| Loading Circulation Time (s) | 12-30 |
| Rubbish Discharging Time(s) | <=30 |
| Oil Pressure(mpa/kg) | 19.6/200 |
| Factual loading(M³) | 8 |
| Compressed Proportion | 1:3/1:2 |
| Equipment | Equipped with hermetic dustbin, hydraulic system and operating system. Automatic compress and uninstall, sewage can be collected by the dump tank. Pressure is large, leakproofness is good, operation is convenient and security is dependable. With tipping controls inside the cab. |
| Power of movement | Hydraulic pump |
| Material of box | Carbon steel |
| Selective configuration | PLC electric automatic control |
(1) More than 12 years professional manufacturer experience.
(2) CCC ISO9001 agreement
(3) Be designed according to your requirements
(4) Small order can be accepted
(5) We accept 100% inspection, welcome to our factory at any time
(6) 12 month quality guarantee term
We can offer 4x2, 6x4, 8x4, Dongfeng, Sinotruck, FOTON, SHACAN, FAW, CAMC, I SUZU, JMC, JAC with 3m3 to 20m3 garbage compactor trucks.
How does it work?
III. Details of Japan brand 8 Cubic meter Compression Garbage Truck I-SUZU 7 Tons
Compactor Garbage Truck Price
1.Compacting System
Include collecting Panel & Pressing Panel. All made of high tension steel with long time use
2.Loading System
Lifting system are chose as per customer requirement,including Barrel Lifting,Square Container Lifting,Skid Loader lifting system.
3.Sewage Container
The bottom of the tank is equipped with a sewage collection tank to prevent the sewage in the tank from leaking out, effectively preventing the occurrence of secondary pollution.
4.Rear Full Electronic Control
Electronic control Panel install in the back of the container body for easy handling. Imported PLC Control System with auto & semi-auto control. Optional Inside Cabin Control
5.Manual Handle Control
The hydraulic controller at the rear of the cab controls the work of the reversal mechanism and the pressure filling mechanism to ensure the accuracy and reliability of each mechanism and improve the reliability of the vehicle..
6.Lift hydraulic strut
7.Reverse hydraulic strut
IV.Flip form of Compactor Garbage Truck
Load operation is less than 30 seconds, unloading operation time is less than 45 seconds;
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turnover mechanism,can also choose ground hopper and
other kinds of loading mechanism.
Automatic control-- The hydraulic control operation system can be controlled by electric and manual, one operation system button installed
in the cab, the other operation system button installed at the back of the upper body.
IV.Flip form of Compactor Garbage Truck
Load operation is less than 30 seconds, unloading operation time is less than 45 seconds;
Can choose 240L(single bin,double bins)or 360L,660L,1100L standard bin lifting and turnover mechanism,can also choose ground hopper and
other kinds of loading mechanism.
Automatic control-- The hydraulic control operation system can be controlled by electric and manual, one operation system button installed
in the cab, the other operation system button installed at the back of the upper body.
IV. Production workshop
There are more than 500 workers in our factory. Every production details are strictly controlled by our technicial engineers and production manager.
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
VI. COMPANY INFO
HUBEI FUYA VEHICLE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales
and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck ,
refrigerated truck, lpg and etc.
Welcome to contact with us for more info. We will offer you the best truck as we can .
Send Message
