The garbage compactor truck usually compacts the waste using a hydraulically powered mechanism that employs a moving plate or shovel to scoop the waste out from the loading hopper and compress it against a moving wall. In most compactor designs, the plate has a pointed edge (hence giving it the industry standard name packer blade) which is designed to apply point pressure to the waste to break down bulky items in the hopper before being drawn into the main body of the truck.
Compactor designs however, have been many and varied, the most popular being the traditional "sweep and slide" system pioneered on the Leach 2R Loadmaster. The Heil Colectomatic used a combination of a lifting loading hopper and a sweeper blade to clear and compact waste in anticipation of the next load.
| Chassis model | ZZ1257N4341W | Chassis brand | SINOTRUK |
| Overall dimensions | 9800X2496X3048mm | Wheel base | 4325+1350mm |
| Front/rear wheel track | 2022, 1830/1830mm | Front/rear suspension | 1500, 2600mm |
| Approach/departure angle | 16/15° | Maximum speed | 90km/h |
| Chassis Manufacturer | China National Heavy Duty Truck Group Co.,Ltd | ||
| Cab | Configuration | HW76 a row and a half deluxe cab(with sleeping berth), allowable 3 passengers | |
| Color | White, other color is optional | ||
| Engine | Model | WD615.69 | |
| Emission | Euro 3 | ||
| Type | 6 cylinders, in-line, 4-stroke, water cooled, turbo inter-cooling, direct injection, diesel engine | ||
| Rated power | 336hp, rated power speed 2200rpm | ||
| Displacement | 9726ml | ||
| Max.torque | 1350N.m | ||
| Bore x stroke | 126x130mm | ||
| Manufacturer | China National Heavy Duty Truck Group Co.,Ltd | ||
| Tire | Size | 12R22.5 tubeless tire | |
| Number | 10+1 nos | ||
| Clutch | φ430 diaphragm clutch | ||
| Fuel tank | 400L iron oil tank | ||
| Front axle | HF 7 tons | ||
| Rear axle | ST 16 tons | ||
| Drive form | 6X4 | ||
| Suspension | Multi leaf springs | ||
| Rated voltage | 24V, DC | ||
| Transmissions | gearbox HW19710, 10 speed forward 2 reverse. | ||
| Steering device | Power assisted steering | ||
| Steering wheel | Left hand drive | ||
| If there is a slight change in the chassis parameters above, please take the actual product as the standard | |||
Refuse compactor structure parameters | |
Equipment | |
Structure | Body, sub frame, lifting rear part, the loading device, the pushing-out plate, hydraulic and electric systems |
Loading capacity | 18m3 |
System of loading | Mechanized, rear loading |
Modes of the pressing | Manual,semi-automatic,automatic,lifting rear part operation manual,loading,pushing,pressing, pushing out automatic |
Body | |
Version | All-metal |
Shape | arc-shaped |
Sidewalls | Sheet carbon steel (thickness: 4 mm) |
Bottom | Sheet carbon steel (thickness: 4 mm) |
Roof | Sheet carbon steel (thickness: 4 mm) |
Front frame | Sheet carbonaceous steel (thickness: 5 mm) |
Rear frame | n-shaped profile from sheet carbon steel (thickness:5 mm) |
Basis | 120x120mm (thickness: 5 mm) |
Loading bunker | |
Loading bunker | All-metal with sidewalls and a loading ladle |
Volume | 1.8 m3 |
Sidewalls | Sheet carbon steel (thickness: 4 mm) |
Ladle floor material | Sheet carbon steel (thickness: 4 mm) |
Liquid drain | Drainage channel,sewage tank |
Working zone Lighting | 2 lamps |
Mechanism of raising | Two hydraulic cylinders |
Ensuring tightness | Between the body and lifting back part in the lower part profile acid-proof rubber is used. |
Pressing system | |
Features | Control mode diversification,bidirectional compression |
Pressure | 16Mpa |
Compaction ratio | 3.0:1 |
Loading cycle | 25-30 second |
Unloading cycle | 15-20 second |
pressing mechanism | The giving plate and hinge related pressing plate moving on two directing bars |
Pressing mode | Automatic pressing (1 full cycle and continuous pressing) and controlling of each cycle of pressing separately |
Control of pressing | Control from the external panel on the bunker |
Lifting rear part | |
Mechanism of lifting | Two hydraulic cylinders |
Function description | Suitable for various rubbish bins |
Others | |
Color and Logo | Optional |
Standard configuration | Chassis,arc-shaped body,sub frame,rear lifting part,loading bunker,pushing-out plate,hydraulic system,pressing system,sewage tank,climbing ladder,pneumatic control. |
Selective configuration | PLC electric automatic control,multifunctional rear lifting part,rear handrail and footplate,other shapes of body,rear swing arm,and etc. |
