Features of KAT Tractors:
A. Easy to add accessories
With integrated frame and independent expandable PTO may easily add such accessories as loading, excavation, bulldozing, well digging, and lifting etc. to expand functions of tractor and increase utilization rate of tractor.
B. Easy to utilize matured technology
Adoption of matured technology in loading truck, engineering machinery, and other industry may directly be made for product components. For example, application of such technologies as caliper disc brake, wet clutch, synchronizer, fuel and gas booster etc may accelerate to upgrade technology of large-power tractor products relying on developing advantages in the other industries.
C. Easy to expand portfolio of product
Adoption of matured products from loading truck, engineering machinery, and agricultural machinery are made for the components. For each type of product, different series of specification have been designed. Optimized portfolios of these series of components have formed products with different power ranges, which may greatly reduce developing cycle of products. Over four years, eight models with more than 30 variants have totally been developed by 110-280 HP in successively, where mass production has been made for six models.
D. Easy to meet user' requirement of individualization
Adjustment of speed ratio of transfer box may have different speed with different shifts to meet agricultural requirements of refinement in different areas. Adjustment of speed ratio of final transfer box may meet the requirements of downstream output rpm against different countries. The tractors may be customized according to user's requirements against functional modules.
E. Easy to organize mass production
Adoption of general components has been made for modularized structures to fully utilize social resources and professionalized production and manufacturing platform in C. Large-scale fixed assets is unnecessarily invested to produce wheel type of large tractor with high power in mass production, which may change traditional production organization method of tractor and solve current production bottleneck for production of large traditional tractor.
F.Easy to Service
All possible defects can easily be found and easy maintenance may be made due to modularized structure.
| Model | LT1204 | |||
| Engine | Power/speed | kW/r/min | 91(120)/2200 | |
| Specific Fuel Consumption | g/kw.h | ≤220 | ||
| Drive Type | / | 4×4 | ||
| Dimension(Length/Width/Height) | mm | 5090/2300/3070 | ||
| Wheel Base | mm | 2688 | ||
| Track(Front wheel) | mm | 1698-2122 | ||
| Track(Rear wheel) | mm | 1626-2150 | ||
| Min. Ground Clearance | mm | 460 | ||
| Min.running weight | kg | 5700 | ||
| Front counter weight | kg | 500 | ||
| Rated Traction Force | kN | 28 | ||
| No. of gear | 16F+4R | |||
| Forward Gear | Speed | km/h | 4-33 | |
| Reverse Gear | Speed | km/h | 6-28 | |
| Tyre Model | Front Tires | / | 14.9-24R1 | |
| Rear Tires | / | 18.4-38R1 | ||
| Power-output shaft Type | / | Rear position or independent | ||
| power-output shaftRated Speed | r/min | 540/1000 | ||
| Max. Pull-down piston pull | kN | 31 | ||
