1.It is modification of Model MX-151 power tiller & 7C-1 trailer.
2.The tractor is featured by its front-wheel drive.Its transmission system is based on Model MX-181 power
Tiller.We used differential mechanism instead of the embedded clutch.
3.The trailer is based on that of Model 7C-1, and with lighting & warning system.
4.The brake system is very reliable, and its oil consumption is low compared with the old model.
5.It is ideal & suitable for short distance transport, and can be used in countryside, suburb, mountain area, and hilly land.
6.Field work may be recovered by unloading the trailer, connector, and adding & changing few parts.
TECHNICAL SPECIFICATIONS:
| Model of Tractor | Unit | MX201JY | ||
| Structure weight | kg | 830 | ||
| Load weight | kg | 1000 | ||
| Wheel base | mm | 2254 | ||
| Overall dimensions (LxWxH) | mm | 4369 x 1485 x1415 | ||
| Carriage dimensions (LxWxH) | mm | 2000 x 1000 x400 | ||
| Maximum gradient | ° | 20 | ||
| Type of tractor | 4*2, front-wheel drive | |||
| Travelling speed | Forword | Km/h | 6.8, 11.2, 19.8, 13.2, 23.6, 38.3 | |
| Reverse | 4.9, 9.6 | |||
| Type size | front-wheel:6.00-12 | rear-wheel:7.00-16 | ||
| Wheel track | mm | front-wheel:800 | rear-wheel:1300 | |
| Min. ground clearance | mm | 180 | ||
| Min. turning radius | m | ≤11 | ||
| Model of engine | ZS1110N | |||
| Type of engine | Horizontal 4-stroke | |||
| Bore x stroke | mm | 110×115 | ||
| Total displacement | L | 1.0931 | ||
| Compression ratio | 17:1 | |||
| Turing speed of crankshaft | rpm | 2200 | ||
| 1-hour rated output | KW/hphp | 14.7/20 | ||
| 12-hour rated output | KW/hp | 13.23/18 | ||
| Specific fuel consumption | g/kw.h | ≤244.8 | ||
| Specific lube oil consumption | g/kw.h | ≤2.72 | ||
| Cooling mode | Condenser (Radiator) | |||
Company:
Packing:
Our Service:
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
QC Flow:
Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facilty is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure,
please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
FAQ:
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
