Model NO.
SD10-9DA
Drive Wheel
4×2
Engine Capacity
＜4L
Seats
≤5
Horsepower
12HP
Tire Certification
GCC
Tire Design
Tubeless
Dumping Type
Front Lifting Style
Condition
New
Diesel Model
CF1100nm
Colour
Orange Site Dumper
Delivery Time
15 Days
Transport Package
20gp /6 Unit
Specification
CE
Trademark
topmac
Origin
Zhengjiang, Jiangsu, China
HS Code
84305090
Production Capacity
50 Unit
After-sales Service:
6 Month
Warranty:
12 Month
Transmission Type:
Manual
Power:
Diesel
Load Capacity:
1-10t
Emission Standard:
Euro 2
We have 30 years experience to manufacture site dumpers in China, it ranges from 1~ 3 ton.
We have a wide range of products to match your requirement. We start with 1 ~3 ton dumper which allows you to get in to tight space with good mobility.
We also develop a wide-width tire dumper to suit for the moving through the slush.
One Ton
Site Dumper
Main Specifications
Shipping, Delivery & Maintenance
We have a wide range of products to match your requirement. We start with 1 ~3 ton dumper which allows you to get in to tight space with good mobility.
We also develop a wide-width tire dumper to suit for the moving through the slush.
One Ton
Site Dumper
Main Specifications
| FC1 | FC1A | |
| Payload | 1000kg | |
| Diesel Engine | Single cylinder, Water-cooling system with radiator | |
| Rated Power | 12 hp/2200 rpm | |
| Water capacity | 317 ltr (11.2 cuf) | |
| Struck capacity | 467 ltr (16.5 cuf) | |
| Heaped capacity | 765 ltr (27 cuf) | |
| Min.Out turning circle Radius | 4 m | |
| Min. Ground Clearance | 200mm | |
| Discharging Height | ||
| Tipping System | Mechanic | |
| Engine starting | manual | Manual and Electric |
| Electric Battery | No | 12 V, 75 amp. |
| Driver awning | No | Yes |
| Road speed | 5.8 ~23 km/h | |
| Reverse speed | 4.7 km/h | |
| Transmission | 3 forward & 1 reverse gear | |
| Chassis | Rigid frame | |
| Driving axle | 4*2 | |
| Clutch | Constant-contact, Single disc, dry clutch | |
| Dimension | 2650*1600*1450mm | 2650*1600*2074mm |
| 20' container can be loaded with | FC1 | 2 complete units, or 10 sets in SKD condition |
| FC1A | 2 complete units, or 6 sets in SKD condition | |
| Delivery time | 3 weeks after confirmation of the order | |
| Maintenance | ||
| The site should be cleaned after work every day, kept lubricated at all points where grease caps have been provided every week. The Engine oil is suggested to be changed every 70 operating hours. | ||
Send Message
