Diesel Engine Forklift Truck (2.0-3.5ton), Forklift, Truck

FE4P
· Devices for night operations
Warning lamps and rear lamps are installed to facilitate night operations.
· And-fatlgue ergonomic chair
The seat can be adjusted in multi-angle for comfortable operation of different drivers.
· Main frame of multi-specifications
Users can choose main frames in various sizes (two-grade, two-grade and full free, three-grade main frame, etc., see Annex).
· Split-type oil tank with increased capacity
Split-type oil tank with increased capacity reduces the thermal equilibrium temperature and facilitates maintenance.
· Multl-functlon LED meter
With such functions as automatic diagnostics and automatic power off.
· Advanced separately excited control system
Separately excited DC controller has such functions asregenerative braking and down-sliding prevention on ramps.
· Full open design
The cover, left and right guards of battery case cover can be opened or removed to facilitate raised-up repair and maintenance of the battery.
· Various options in banery specifications
Users can choose high-capacity battery to increase the operating time per shift.
· low centre of gravity
Battery with low centre of gravity offers greater stability.
· Smart declining buffer system
Decline speed slows down automatically when the forklift is lowered to 60-100mm.
· Various options in accessory specifications
Based on the specific operating condition, users can install accessories with different specifications (such as lateral controller, and soft clamps to improve operational e




Parameters


























Features


























Model


FE4P20
FE4P25
FE4P30
FE4P35
Configuration


DC
AC
AC2
DC
AC
AC2
DC
AC
AC2
DC
AC
AC2
Power type


Electric
Electric
Electric
Electric
Load capacity
kg
2000
2500
3000
3500
Load center
mm
500
500
500
500
Standard mast lifting height
mm
3000
3000
3000
300
Overhead guard height
mm
2110
2110
2115
2115
Overall length(without forks)
mm
2375
2410
2620
2700
Overall width
mm
1150
1150
1225
1225
Turning radius
mm
2110
2140
2410
2500
Travel speed(with/without load)
km/h
1112
1112
1213
1112
Total weight(with battery)
kg
4000
4150
5200
5600



A. As standard accessories, the rear ramp and warning light improve the safety of night operations.
B. Steering axle and the forklift body are flexibly connected to reduce vibration impact, minimi-zing the failure rate and extending the service life.
C. Split-type oil tank with increased capacity reduces the thermal equilibrium temperature, extends service life of hydraulic components and facilitates maintenance.
D. If operation mistakes and system failures occur, the high definition LCD display equipped with an auto-diagnostic function can carry out self-diagnosis and display the diagnosis information by pictures or texts. In case of power shortage, it will sound an alarm and cut power off to prevent over discharge.
E. Optimal design of wide-view main frame offers a wider vision to the driver, thus improving operational efficiency.
F. DC: U.S. CURITS electronic control is used AC: Italian ZAP I electronic control is used High-frequency MOSFET integrated controller has regenerative braking, reverse braking and other functions to achieve energy recovery, and to effectively reduce the system heat.Ad-vanced separately excited control system can prevent down-sliding on ramps, eliminating down-hilling of the forklift during its re-start process after stopping on a ramp and thus ensuring safe operation.
G. With its full-open design, the forklift provides ease and convenience for users to replace and maintain the battery.
H. Transmission system with parallel connection can transmit large loads and has a strong climbing ability.
I. By using the adjustable steering wheel, drivers can find the optimum driving position and minimize fatigue caused by prolonged operation.
J. Seat switches and emergency power switching technology in line with international standards are applied. The motor will be automatically turned off if the driver leaves the seat for a time period exceeding the preset period, so as to prevent unnecessary power consumption, and to ensure safety and reliability. Seat belts and handrails provide more security in operating. Adjustable seats can facilitate operation of different drivers.
K. Buffered lifting cylinder is used. When loads are lowered to a position 100 ~ 60 mm to the ground, the fuel cylinder will decelerate through throttling, increasing the operating safety.
L. The elegant built-in design of the tilt cylinder enlarges driver's operating space and makes it easier for drivers to get on and off.
We provide main frames and accessories with various specifications (such as lateral controller and paper folder, etc.). See the Configuration Table for details.,




A. As standard accessories, the rear ramp and warning light improve the safety of night operations.
B. Steering axle and the forklift body are flexibly connected to reduce vibration impact, minimi-zing the failure rate and extending the service life.
C. Split-type oil tank with increased capacity reduces the thermal equilibrium temperature, extends service life of hydraulic components and facilitates maintenance.
D. If operation mistakes and system failures occur, the high definition LCD display equipped with an auto-diagnostic function can carry out self-diagnosis and display the diagnosis information by pictures or texts. In case of power shortage, it will sound an alarm and cut power off to prevent over discharge.
E. Optimal design of wide-view main frame offers a wider vision to the driver, thus improving operational efficiency.
F. DC: U.S. CURITS electronic control is used AC: Italian ZAP I electronic control is used High-frequency MOSFET integrated controller has regenerative braking, reverse braking and other functions to achieve energy recovery, and to effectively reduce the system heat.Ad-vanced separately excited control system can prevent down-sliding on ramps, eliminating down-hilling of the forklift during its re-start process after stopping on a ramp and thus ensuring safe operation.
G. With its full-open design, the forklift provides ease and convenience for users to replace and maintain the battery.
H. Transmission system with parallel connection can transmit large loads and has a strong climbing ability.
I. By using the adjustable steering wheel, drivers can find the optimum driving position and minimize fatigue caused by prolonged operation.
J. Seat switches and emergency power switching technology in line with international standards are applied. The motor will be automatically turned off if the driver leaves the seat for a time period exceeding the preset period, so as to prevent unnecessary power consumption, and to ensure safety and reliability. Seat belts and handrails provide more security in operating. Adjustable seats can facilitate operation of different drivers.
K. Buffered lifting cylinder is used. When loads are lowered to a position 100 ~ 60 mm to the ground, the fuel cylinder will decelerate through throttling, increasing the operating safety.
L. The elegant built-in design of the tilt cylinder enlarges driver's operating space and makes it easier for drivers to get on and off.
We provide main frames and accessories with various specifications (such as lateral controller and paper folder, etc.). See the Configuration Table for details.
Download
Click on the download, for more information
User manual Download
FE4F FE4D
Online Order
If you like our products,please click here to order
» Online Order