Customized
Customized
Certification
ISO14001, ISO9001, Crcc
Type
Train Brake
Friction Body Material
Polymer
Steel Plate Material
Q235A
Brake Shoe Thickness
45~50mm
Brake Shoe Width
50~85mm
Steel Back Plate Length
300~400mm
Trademark
QL
Transport Package
W/CS
Specification
Subject to design drawing
Origin
China
HS Code
8607210000
a. The adjustable range of friction coefficient , it is applicable to various running speeds.
b. The composite brake shoe provides high abrasion resistance and long service life, so as to greatly reduce the workload of brake shoe replacement and save the costs of maintenance and operation.
c. Without sparks when braking, it can avoid the iron powders generated during wear-and-tear and relieve the impacts on electric equipment.
d. It is of light weight, so it can be replaced conveniently and easily.
e. It causes small abrasion and no thermal crack on the tread.
f. The lower friction coefficient at high speed maintains sufficient braking force, improves the braking performance and shortens the braking distance.
g. The friction coefficient index can be fully increased. The composite brake shoe is combined with the small-diameter braking cylinder to save compressed air. When braking on long heavy down grade, it may shorten the air recharge time, so as to improve the wagon safety when running on heavy down grade.
h. The composite brake shoe won't result in rough tread, so it could reduce the noise level by 8~10dB.
i. Compliance with Standard TB/T2403
2. Application:
Applicable for freight rolling stock speed at 120km/h, and axle load below 25t.
3. Technical Specification:
| Performance | Unit | Index |
| Compression strength | Mpa | ≥25 |
| Compression modulus | Mpa | ≤1.3*103 |
| Bending strength | Mpa | ≥8 |
| Impact strength | kj/m2 | ≥3.0 |
| Rockwell hardness | HRR | ≤100 |
| Density | g/m3 | ±5% deviation from the nominal value |
| Soluble content of acetone | % | ≤5 |
| Shear strength between friction body and steel back plate | Mpa | ≥1.20 |
| Tensile force of friction body and steel back plate | KN | ≥15 |
3. Product & Workshop:
Product
Workshop
4. Some Production Equipment & Tester:
