Model NO.
ZY-fender-92
Material
Rubber
Shape
Pneumatic
Structure
Floating
Size
Dia:500~4500, L:1000~9000
Type
Commercial Vessels
Marine Parts
Fender, Bumper
Usage
Fishing, Trade, Protection, Ship Docking
Certification
BV, SGS, Dnv, ABS, ISO9001, CCS
Capability
Ship, Dock Protection
Feature
Wear-Resistant
Color
Black
Trademark
ZY-fender
Specification
SGS, ABS, ISO9001, CCS, BV, ISO17357
Origin
Qingdao
HS Code
401695
Yokohama Pneumatic fender is the advanced anti-collision device for marine application in the world today.
It uses compressed air as medium to absorb the impact energy when ship-to-ship contact (STS) and ship-to=berthing (STB). Comparing with traditional bumper style rubber fender, it has the following advantages: more energy absorption, less reverse impact on ships, less weight, easy installation, softer and economical etc. So pneumatic rubber fenders are widely used by large tankers LPG vessels, ocean platforms, large docks , harbor and wharfs.
Other specifications of pneumatic rubber fender are also available upon request of customers.
Simple and low cost installation
The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
Chain and tyre net
Almost floating fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them.
Pneumatic fender
Compressing amount 60%, ±5% Reverse force RF & Energy absorption GEA
| Size | Original pressure 0.05Mpa | Original pressure 0.08MPa | ||||
| Size D×L(M) | Body weight(kg) | R(KN) | GEA(K J) | Body weight(Kg) | R(KN) | GEA(K J) |
| 0.5×1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
| 0.6×1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
| 0.7×1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
| 1.0×1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
| 1.0×2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
| 1.2×2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
| 1.35×2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
| 1.5×3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
| 1.7×3.0 | 405 | 639 | 191 | 436 | 830 | 263 |
| 2.0×3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
| 2.5×4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
| 2.5×5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
| 3.0×5.0 | 1880 | 2104 | 1210 | 2155 | 2709 | 1571 |
| 3.0×6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
| 3.3×4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
| 3.3×6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
| 3.3×6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
| 4.5×9.0 | 3940 | 5757 | 4752 | 4380 | 7551 | 6633 |
Note: 1.The tolerance of reverse force and energy absorbed is +-10%.
2.The weights listed in table are the body weights not include accessories.
And the tolerance of weight is +-10%
Other specifications of pneumatic rubber fender are also available upon request of customers.
