Yokohama Pneumatic Rubber fender is the advanced anti-collision device for marine application in the world. Pneumatic rubber fender is also known as floating fender or Yokohama type tugboat rubber fender, it is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship to ship and ship to dock. This kind of product can protect the ship or dock from the damage of collision. With inner compressed air, it can float on the water and widely used as protecting medium equipment. Size : D0.5 m x L1.0 m ~ D 4.5 x L9.0m. "XINCHENG" yokohama barco defensas are produced in strict accordance with the ISO17357-2002 and GB/T 2002-2002 international quality standard. Nowadays, our products have been exported to all over the world.
Net Type Pneumatic Fenders are covered with a chain net, wire net, or fiber net. Each end of longitudinal chains, wires, or fibers is linked together with one or two ring(s), which shall be connected with a guy chain or guy-rope. Usually, these nets have used tires together with rubber sleeves for additional protection to the fender body, except for fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
Sling Type Pneumatic Fender is common type of Pneumatic Rubber Fenders. It is designed without chain and tyre net. So its advantage is lower weight than traditional chain and tyre net fenders. Meanwhile, Sling type pneumatic fender commonly used for some small and medium size vessel.
Advantages Pneumatic rubber fender:
1. Large compression deformation, low reaction force, high energy absorption
2. Good floating performance, meet the needs of water level change
3. With compressed air as medium, the collision energy consumption bu compressed air power
4. Easy installation and long service life
| Normal Size | Inner Pressure:50Kpa,60%deflection | Inner Pressure:80Kpa,60%deflection | |||||
| (mm) | (mm) | (KN) | (KN.M) | (Kpa) | (KN) | (KN.M) | (Kpa) |
| Diameter | Length | Reaction Force | Energy Absorption | Hull Absorption | Reaction Force | Energy Absorption | Hull Absorption |
| 500 | 1000 | 64 | 6 | 132 | 85 | 8 | 174 |
| 600 | 1000 | 74 | 8 | 126 | 98 | 11 | 166 |
| 700 | 1500 | 137 | 17 | 135 | 180 | 24 | 177 |
| 1000 | 1500 | 182 | 32 | 122 | 239 | 45 | 160 |
| 1000 | 2000 | 257 | 45 | 132 | 338 | 63 | 174 |
| 1200 | 2000 | 297 | 63 | 126 | 390 | 88 | 166 |
| 1350 | 2500 | 427 | 102 | 130 | 561 | 142 | 170 |
| 1500 | 3000 | 579 | 152 | 132 | 731 | 214 | 174 |
| 1700 | 3000 | 639 | 191 | 128 | 840 | 267 | 168 |
| 2000 | 3500 | 875 | 308 | 128 | 1150 | 430 | 168 |
| 2500 | 4000 | 1381 | 663 | 137 | 1815 | 925 | 180 |
| 2500 | 5500 | 2019 | 943 | 148 | 2653 | 1317 | 195 |
| 3300 | 4500 | 1884 | 1175 | 130 | 2476 | 1640 | 171 |
| 3300 | 6500 | 3015 | 1814 | 146 | 3961 | 2532 | 191 |
| 3300 | 10600 | 5121 | 3090 | 171 | 6612 | 4294 | 220 |
| 4500 | 7000 | 4660 | 3816 | 186 | 5866 | 4945 | 233 |
| 4500 | 9000 | 5747 | 4752 | 146 | 7551 | 6633 | 192 |
| 4500 | 12000 | 7984 | 6473 | 154 | 10490 | 9037 | 202 |
Pneumatic fenders product details
Xincheng Pneumatic fenders have passed ISO9001 Quality management system certificate, each fender is fully comply with ISO17357-2014 and GB/T21482-2008 international Production Standard.
Pneumatic Fender Packing and shipping
Xincheng Pneumatic Fender have many ways for our clients to choose, such as infate packing (with air) and deflated packing(without air),. For bigger size fenders, it had better to ship without air, aim to help you to save much transportation cost.
Qingdao Xincheng Rubber Products Co.,ltd was founded in 1986, mainly produces pneumatic rubber fenders, marine rubber airbags, ship launching with airbags applications, foam filled fenders and other rubber fenders, which as the leading enterprise has passed CCS , ISO9001:2008, SGS, BV certificates. We have established long time cooperation with many clients, from Southeast Asia, Middle East, South America and EU countries and many other countries throughout the world.
1. Are you a factory or trading company?A: We are a factory.
2. What is your MOQ?
A: ONLY 1 piece.
3. What is your lead time for production?
A: About 5 working days after receiving the down payment.
4. What is your payment terms?
A: T/T.
5. What is your warranty?
A: Warranty is 24 months.
6. What certificate do you have?
A: ISO9001:2008, CCS, SGS, BV, LR, RS.
