This kind of thermometer is mainly used in ships, pipelines and some heating or cooling facilities. It remains direct and accurate, and more reliable and resistant to vibration.
Structure
The thermometer is made up of three parts:case,stem and glass insert. In the aspect of shape,
We have three types:straight, 90°angle and 135°angle.
Case
The case has three different styles, type A, type B and type C. See their differences in table 1.0
Type | Length | Width | Length | Appearance | Color | Standard |
A-110mm,150mm,200mm | 30mm | Aluminum Die Casting | Polishing Anodizing | Golden | DIN16181 DIN16182 DIN16185 DIN16186 DIN16189 DIN16190 DIN16191 | |
B-110mm,150mm,200mm | 36mm | Polishing sandblasting | Golden | |||
C-110mm,150mm,200mm | 36mm | Polishing painting | Yellow | |||
Glass Insert
The traditional manual process and the combination of advanced computer graphics technology,permanent black silk screen printing,make sure scale never fall off. Precision remain within +/- 1 separated values. Specifications in table.
Shape | Nominal range | Scale division | Filling | Back xolor | Immersion | Standard | |
Round prismatic | Straight | -30-50ºC/ºF -30-70ºC/ºF | 1ºC/ºF, 2ºC/ºF | Organic liquid | White back | 40mm 50mm 63mm 80mm 100mm 150mm 100mm 250mm | DIN16195 JJG130-2004 |
-0-60ºC/ºF | 1ºC/ºF | ||||||
90°Angle | 0-100ºC/ºF 0-120ºC/ºF | 1ºC/ºF, 2ºC/ºF | |||||
0-160ºC/ºF 0-200ºC/ºF | 2ºC/ºF, 5ºC/ºF | ||||||
135°Angle | 0-300ºC/ºF 0-400ºC/ºF | 5ºC/ºF | |||||
0-500ºC/ºF 0-600ºC/ºF | 10ºC/ºF | ||||||
Stem
In application,we often adopt different materials. Please check them in table
Material | Application environment | Maximum temperature |
Brass | General use in non-corrosive environment | 300C |
Carbon steel | Corrosion environment | 600C |
Stainless steel AISI304 | ||
Stainless steel AISI316 | Food industry |
As shown in fig 1.4, we adopt two methods to fix stem one use hexagonal turnbuckle to adjust the tension, the other one use small bolt. So there is a little difference between two structures. Please check it in
Stem length | Diameter | Angle | Thread |
20mm 40mm 63mm 80mm 100mm 150mm 200mm 250mm | 10mm 12mm | Straight 135 angle | 3/8" 1/2" 3/4" M16*1.5 M20*1.5 M27*2 |
The protective tubes arc always used in application, in order to enhance safety at the point where the thermometer is fixed to facility, make it operated with high pressure and repaired easily.
Instruction
The following must be specified when an order is placed:
Model no | WLG-A; WLG-B; WLG-C |
Angle | Straight-11, 90angle-12, 135angle-13 |
Temperature range | -30-50,-30-70,0-60,0-100,0-120,0-150,0-200,0-300,0-400,0-500,0-600 |
Length of stem(mm) | 30mm,40mm,50mm,63mm,75mm,80mm, 100mm,120mm,150mm,200mm,250mm,300mm,400mm |
Connected thread | 3/8",1/2", 3/4",M16*1.5, M20*1.5, M27*2 |
Material of stem | Brass, Carbon steel. Stainless steel ss304/316 |
Special characteristics | Brand: xxx |
The design of thermometer comes from Europe and America,which is durable, economical and readable. It is mainly used in general hydronic applications such as chilled and hot water lines and all small piping networks, especially fits for environment full of vibration. Due to the different materials and construction, we have two types as follows:
Model No:WLG-11(straight),WLG-12(90angla)
Gray thermoplastic shell, the length of case is 6"
White v-shaped aluminum scale panel.
Prismatic Capillary, filled with red organic liquid
Clean lens can keep it from dust
Single or double sets of lower part, which is brass, is about 2" 2.5 " or 4" long.
Connected thread: 1/2" 3/4"…
Temperature range | Scale division |
-40+11 F/C 20+120 F/C 20+180 F/C 30+240 F/C 30+240 F/C 50+400 F/C | 2 F/C 2 F/C 2 F/C 2 F/C 5 F/C 5 F/C |
Instruction
The following must be specified when an order is placed:
Model no | WLG-12 |
Diameter or dial | 100mm |
Temperature range | 50+650 F/C |
Dia and length of stem(mm) | Dia12,Dia16mm 100mm,120mm,150mm,200mm,250mm,300mm,350mm,530mm |
Connected thread | 1/2", 3/4",M16*1.5, M20*1.5, M27*2 |
Material of stem | Stainless steel ss304/316 |
Special characteristics | Brand: xxx |
About US
Weitong Marine focus on developing and offering the most competetive marine products for worldwide clients with best service:
1. Quality Assurance & Inspection
We guarantee the quality,not just because we have a complete rigorous management, production and inspection processes to control the quality and avoid detail mistake, but also we attach much importance to customers' satisfactory of product quality. What's more, Mill Test Certificate can be provided for general products, and most of our products are approved by CCS, ABS, DNV, BV, NKK, KR, LR, GL, RINA etc.
2. Efficiency
Your request is promised to be reponsed within1-12 hours. Our experienced sales team get technical support from our engineer team to ensure swift offer and good communication.
3.On Time Delivery
We have rigorous production schedule and professional follow-up process to control the production time. Clients will be informed about the production process in time. Besides, we cooperate with reliable logistic partners to assure the goods to be delivered to you punctually.
4. Customization
If you need customization service, our experienced engineers are able to design the product as per your request or application.
5. Product Range
All marine equipment, accessories and technique solution can be offered.
6.After sales service
After shipping, we keep tracking the shipment, and once goods arrived, we will positively contact client for feedback.
We always insist on the values of "customer-oriented, integrity first" in global trade business. Whenever you need inquiry or help, you can always turn to Weitong Marine, we are always available to reply with answer or provide help over the phone, by email or other.
Should you have any comment or inquiry, please feel free to contact us for more details
Ms kate
Tel: +86-756-8169003
Phone: +86-13923317268
Ohter Product Photos
