Model NO.
G6300ZD06
Cylinders
6
Fuel Type
Tyre Oil or Plastic Oil
Engine Capacity
>6L
Engine
4 Stroke
Engine Position
Inboard
Condition
New
Engine Model
G6300zd06
Rated Power
1103kw
Speed
600rpm
Trademark
AVESPEED
Transport Package
Woodcase
Specification
1000KW/1MW tyre oil Genset
Origin
China
HS Code
8502131000
1. Test objective:
According the project for tyre oil power plant purpose, AVESPEED. tests on the special oil supplied from client by AVESPEED G300 diesel engine on its factory engine test bench.
The test objective is to certify whether the No.4 tyre oil can burn well on the G300 diesel engine or not. AVESPEED. tests the engine by diesel oil and the No.4 tyre oil, and records the engine running parameters. AVESPEED should give the test result for comparing and make a conclusion on the test to client for their decision.
1. Test prepare and device
Test Engine: AVESPEED G6300ZD6 diesel engine;
| 1 | Engine Model | G6300ZD6 | |
| 2 | Type | In-line, 6-Cyls, four-stroke, direct injection, charged, inter cooled | |
| 3 | Bore | mm | 300 |
| 4 | Stroke | mm | 380 |
| 5 | Total displacement | L | 161 |
| 6 | Mean piston seed | m/s | 6.33 |
| 7 | Rated power | kW | 1103 |
| 8 | Rated rev. | rpm | 500 |
Load for engine: Hydraulic dynamometer;
Measurement meters: Explosion pressure meter, infrared thermometer, Fuel consumption measurement system, exhaust temperature indication system;
Tank: No.4 Tyre oil tank 0.6m?with service pump;;
Filter: 363 mush/in?;
Other auxiliary device for engine.
Test place: AVESPEED. EX-Work test bench;
Test standard: AVESPEED Bench test regulation;
Test item: Engine noise (knocking condition), engine vibration, exhaust temperature, fuel consumption, combustion pressure,charge air pressure.
Tyre oil specification:
| Serial No. | Item | Unit | Standard requirements | Inspection result | Single assessment |
| 1 | Flash point (close) | ºC | ≥38 | 50.0 | Qualified |
| 2 | Water and precipitates, %(V/V) | / | ≤0.50 | / | Qualified |
| 3 | Kinematic viscosity (40ºC) | mm2/s | ≥1.9 ≤5.5 | 1.934 | Qualified |
| 4 | Ash content, %(m/m) | / | ≤0.05 | 0.00 | Qualified |
| 5 | Pour point | ºC | ≤-6 | <-32.0 | Qualified |
| The following is blank |
4.1 Pre-test at Mar.23
AVESPEED use a new engine model G6300ZD6. AVESPEED do ex-work test for the engine. The engine running with diesel and adjust all parameters to suitable for ex-work conditions. AVESPEED engineer record all test data for diesel running which for compare with the tyre oil using.
Mar.23 PM AVESPEED start the engine with diesel and warm the engine, then pick load from Hydraulic dynamometer to 100%. Then change over the fuel from diesel to tyre oil and record all parameter for the tyre oil running, and made a contrast on line. AVESPEED engineer made a decision after 100% load with tyre oil operation.
AVESPEED factory adjust engine parts and parameters of the G6300ZD6 to fit to use the tyre oil according their engineer's judge.
