Model NO.
EAKA-A05
Speed
>3.50m/s
Drive Mode
Manual
Control Type
Microcomputer Frequency Control
Lift Mechanism
Telescoping Lift
Use of Occasions
Public Traffic
Guide Rail
Hollow Guide
Transport Package
Carton Packing
Specification
40*20*20
Trademark
EAKA
Origin
China
After-sales Service:
12months
Warranty:
12months
Type:
Control System
Suitable for:
Elevator
Load Capacity:
3000kg
Persons:
>20
Heidenhain encoder 1387 Elevator encoder cable Cable
Elevator Encoder
OD Ф58, Hollow outside-taper shaft, Mounting with Bulge Ring.
Unique aging compensation for illuminant to enhance reliability.
Suitable for closed-loop control of permanent magnet synchronous motor and elevator tractor .
Rear outlet cable, small size, light weight, easy to mount.
Specification
| Electrical | Mecharical and Environmental | ||
| Supply Voltage | DC5V±5% | Rotating speed | ≤2000rpm |
| Current Consumption | ≤200mA(No load) | Starting Torque | 5x10³ N·m(25ºC) |
| Frequency Response | ≤50kHz | Axial Load | 10N |
| Z Signal Amplitude | ≥200mV | Radial Load | 10N |
| DC Offset Voltage | Vd=2.6v±20mv | Shock | 980m/s²,6ms,3 times per axial(XYZ) |
| Vpp Differential signal Amplitude | Vpp=1v±0.2v | Vibration | 50m/s²,40-200Hz,2 hours per axial(XYZ) |
| Waveform Distortion | ≤2% | Protection rating | IP40 |
| Resolution | 2048P/R | Operating Temperature | -20~+120ºC |
| Insulation Resistance | >200MΩ(AC500V 1 min) | Storage Temperature | -40~+120ºC |
| Output Waveform | Analog sine and cosine signal | Humidity | 95%RH(No condensing) |
| Mass | 0.3kg(No cable contained) | ||
Send Message
