Seaflo 320cfm 550CMH Thru Hull Fittings, Thru Hull Fittings, Electrical Fittings

SEAFLO 320CFM 550CMH thru hull fittings

Hi-Flow Capacity 330CFM/550CMH

Benefits
Generally mounted with discharge port fastened directly to a flat external surface to minimize required ducting. The inlet port can then be connected with duct hose to the area requiring ventilation. Standard models are rated for intermittent service, 15 minutes maximum. Commercial duty models are rated for continuous service. For International Markets

Application
Designed to remove gasoline vapors from enclosures, these blowers are also a medium-duty, versatile means of exhausting warm air from galleys and engine rooms, ventilating odors or steam from heads and general marine air circulation.

Product Description
1. IMCI (CE) conforms with EN50014-1, EN50014-2 and EN61000-3-2 and EN61000-3-3USCG 183.410 2. Compliant: Ignition protected
3. Provides ventilation for engine compartments, galleys, bilges and heads
4. Hi-Flow 9, 060 Litres per minute (320 CFM) capacity
5. Up to 25% more efficient than conventional in-line blowes
6. UV resistant white ABS plastic construction, with built-in mounting feet
7. Corrosion proof design and water resistant motor casing for use in the marine environment
8. Very low current draw, and high volume air flow
9. Maximises airflow and efficiency
10. Sealed motor shaft for moisture protection
11. Hose connections each end, for use with 78mm (3") diameter blower hoses
12. Easy to mount - for easy vertical or horizontal installation
13. Does not include mounting screws
14. For intermittent use only