20 Feet ISO Caustic Soda Storage Transport Tanker Chemical Liquid Transport Tank Container For Sale
This ISO Tank Container is a type of intermodal shipping container that can be used for the transport of liquid, gas and powder.It's called an ISO Tank because it meets International Standards Organization (ISO) requirements. Tank containers are used for liquid cargoes,such as petrochemicals,medical drugs,fruit juices,spirits,sweet oils,hazardous materials,fuels and toxic substances etc.
Frame Dimensions (L x W x H) | 6058 x 2438 x 2591 mm | |
Nominal Capacity | 21000 litre (±0.75%) | |
Maximum Gross Mass | 36000 kgs | |
Tare Mass | 3510 kg (± 3%) | |
Design Temperature (Frame & Tank) | -40 to +130 °C | |
Pressure | Working | 1.70 bar |
Test | 2.65 bar | |
Material | Tank (Shell & Ends) | SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%) |
Frame | SPA-H or equivalent | |
Insulation | Shell | Rockwool (50kg/m3) 50mm thick on aluminium foil. |
Ends | Glasswool (16kg/m3) thickness to suit on aluminium foil. | |
Steam Heating | 6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted. | |
Manhole | 500mm low profile, 8 point fixing with Super Tanktyt Lid seal. | |
Safety Relief Assembly | 1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad. | |
Air Inlet assembly | DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad. | |
Top Discharge | DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad. | |
Bottom Discharge | DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain. | |
Thermometer | A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar. | |
Document holder | A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | |
Calibration | A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted. | |
Our factory 
Henan Lishixin Logistics Equipment Co., Ltd is located in Zhengzhou FTA, Henan Province, China, with a registered capital of 3,500, 000USD. Lishixin is specialized in the R & D, mass production and sales of kinds of the 20FT, 30FT, 40FT ISO Storage Tank Containers and Storage Tanks as well as other special logistic Transportation equipments. Based on rich transportation advantages and resource of Central China, Lishixin is committed to supply high quality and cost-effective transportation equipment for clients all over the world.
Main Products:
ISO storage tank containers(Liquid tank containers,Powder Tank containers, Cryogenic tank containers, CNG Tank Container, Cryogenic Liquid Gas Storage Tanks), Cryogenic Tank Semi Trailer etc. Other logistic transportation equipments.
International Market: Annual production capacity 8000units of the Tank Containers, and the annual total sales 3500units, Of which, we have exported more than 800units Tank containers, Cryogenic Tank Semi Trailer to more 25 countries around the world, including Mexico, Columbia, Chile, Peru, Honduras, South African, Nigeria, Egypt, Algeria, Saudi Arabia, Turkey, Pakistan, Myanmar, Uzbekistan, Russia, Ukraine, Philippines, Indonesia, Malaysia, Bangladesh, etc. What's more, we have established long-term semitrailer&tanks supply contracts with more than 10 famous transportation&other type of the enterprises in the world.
The related products of liquid tank container
Customer visting
We are based in Henan, China, start from 2019,sell to Eastern Europe(40.00%),Western Europe(12.00%),Southeast Asia(10.00%),Central America(8.00%),Eastern Asia(5.00%),Mid East(5.00%),Northern Europe(5.00%),South America(5.00%),North America(3.00%),Africa(3.00%),Domestic Market(1.00%),South Asia(1.00%),Southern Europe(1.00%),Oceania(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Tank Container,ISO Tank,iso tank container,40 lpg tank container,iso lng container tank
4. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
