Model NO.
JSXT0654
Length
20′
Gross Weight
23T
Experice
>10 Years
Producing Period
20 Days
Frame Size
20ft
Life Span
25 Years
Color
Customized
Capacity
8320 Liters
Coating /Lining
6 mm-8mm Lead Lining
20FT Frame
Q355D/SPA-H
Tank Material
SA-516m Gr.485
Design Tempurature
-40~65 Degrees
Transport Package
by Frame or Bulk or Roro
Specification
6058*2438*2591MM
Trademark
JSXT
Origin
China
Production Capacity
200 Unit Per Months
After-sales Service:
12 Months
Warranty:
12 Months
Type:
Tank Container
Certification:
ISO9001, CSC, CE/EU
Volume:
6.058*2.438* 2.591
Material:
Steel Structure
20K2 20FT Tank Container 8.32m3 Lead Lining Bromine T22 Un1744 Portable ISO storage tank
Lead Lining Bromine T22 UN Portable ISO 20ft Tank Container
Bromine Storage and Process
the general design consists of a 20' ISO frame and a tank made of carbon steel with internal lead-lining. The tanks are equipped with a manhole of 20" nominal size. The manhole is located on the top of the tank approx. in the centre of the shell. A working platform is installed in the area of the manhole. The platform is located all around the manhole. Mounting ladders are installed on both longitudinal sides. Filling, discharge and safety devices are installed on top of the manhole covered and protected by dome cover. The frame dimensions: 20' x 8' x 8' = 6058 x 2438 x 2438 mm. The frame is equipped with corner castings according to ISO regulations. Further handling devices are not installed.
For the handling of the tank containers procedures as following are permitted. Lifting / transfer • by spreader fixed to all upper corner castings. This is the preferred method. • by using of traverses and ropes of sufficient strength. The ropes have to be equipped with suitable and approved arresting devices which have to be fixed to the lower corner castings.
Attention: The handling of the containers by using fork lift or similar device is not allowed. Transportation • by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations.by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred.
Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container.
the general design consists of a 20' ISO frame and a tank made of carbon steel with internal lead-lining. The tanks are equipped with a manhole of 20" nominal size. The manhole is located on the top of the tank approx. in the centre of the shell. A working platform is installed in the area of the manhole. The platform is located all around the manhole. Mounting ladders are installed on both longitudinal sides. Filling, discharge and safety devices are installed on top of the manhole covered and protected by dome cover. The frame dimensions: 20' x 8' x 8' = 6058 x 2438 x 2438 mm. The frame is equipped with corner castings according to ISO regulations. Further handling devices are not installed.
For the handling of the tank containers procedures as following are permitted. Lifting / transfer • by spreader fixed to all upper corner castings. This is the preferred method. • by using of traverses and ropes of sufficient strength. The ropes have to be equipped with suitable and approved arresting devices which have to be fixed to the lower corner castings.
Attention: The handling of the containers by using fork lift or similar device is not allowed. Transportation • by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations.by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred.
Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container.
Model NO. | T22 UN Portable ISOTank |
Volume L | 8320L |
External dimensions /mm | 6058*2438*2438 |
Tank size /mm | φ1454*5701 |
Design pressure /Bar | 6.67 |
Test pressure/ Bar | 10 |
Design temperature(ºC) | -40 to 65 |
Tank material | SA516M Gr485 |
Shell nominal thickness /mm | 10 |
tank nominal thickness /mm | 12 |
Anti-corrosion in tank | Lining lead 6~7mm |
Tank net weight / KG | ≈7800 |
Maximum operating quality /KG | 36000 |
loading and unloading type | Top loading+ top unloading |
Accessory configuration | Safety valve+bursting disc*1, DN65 Gas phase valve*1, DN25 Liquid phase valve (matched with PTFE siphon and liquid trap)*1, DN40 Spare port*1, DN40 Manhole*1, DN500 |
Design/Manufacturing Standards | IMDG CODE ,ADR/RID,49CFR,TIR, USDOT,T22 UN Portable Tank, ASME BPVC Sec Div.1-2017 |
third party inspection | BV, ASME , TS, CCS |
1.Payment term: 100%T/T or LC payment
100%T/T, 30% deposit for production, pay the balance 70% before the shipment.
2. Warranty : 12 months
No warranty for consumable parts, but we will send you free consumable parts, on-board tools, wires, lamps, etc. before the shipment.
Free consultation service for life.
Technical repair and guidance questions, engineers can come to service
3.Delivery time: 15-45 working days
Check if the product is in stock or sufficient raw materials
Normal quantity order delivery time is 15 working days
Check if the product is in stock or sufficient raw materials
Normal quantity order delivery time is 15 working days
Big project need to check request delivery time and delivery details required
4.Services
4.Services
Welcome to visit our factory at any time
Order confirmation, drawing confirmation, details and requirements confirmation.
Production photos and videos are updated to customers every week
24 hours online for consult
24 hours online for consult
Provide support for post-parts demand, factory price direct delivery.
5. LOGO & Color:
factory recommend or as your request.
6.Quality control:
5. LOGO & Color:
factory recommend or as your request.
6.Quality control:
Our welding workers who have international welding certificate with good technically.We have QA&QC control in each production link, and will continue production after passing the inspection.
Various production line processes.
Welcome inquiry anytime to get best offer !
Send Message
