Whole Glass Panoramic 13, 10, 8, 6 Person Panoramic Elevator, Elevator, Lift

Control Technology

1, The matured and reliable serial communication
The concise and reliable serial communication network is adopted between various control sub-systems in order to fulfill a series of the functions such as calling, command, group supervision signal, floor display etc. It greatly reduces the trouble possibilities out of circuit problem, largely enhances the reliability of the elevator travel.  At the same time, it brings  more convenient repair and maintenance to the elevator system.

2, High efficient vector VVVF inverter
We can have precise real-time control of the motor rotating toque, ensure the smooth elevator travel condition, sensitive reaction, the most comfortable start through adjusting the current and phase according to the actual load of the car, up / down speed.

3, Permanent magnet synchronous gearless traction machine
We choose rare earth material and fully combine coaxial transmission technology and digital variable frequency technology with group computer combined control technology.  With less running cost & less energy dissipated. Compared with the ordinary and traditional technology, gearless traction machine can save more than 30% of the energy. Gearless traction machine needs no renewal of lubricant. Without grease pollution, low noise, quiet & natural.

4, Worm geared traction machine
We chose the superior performance elevator special traction machine and comprehensively adopt the advanced drive and feedback technology such as WWP, PWM, vector control, distance control, numerical weighing etc. to make the travel quality be full perfect.

5, Top advanced door operator system
Suxun elevator applies the advanced VVVF variable voltage and variable frequency control technology to the lift door operator system so as to ensure the smooth lift door and quiet switch. What is more, the self-learning door load detector increases the sensitivity of the elevator door switching on/off. It monitors the variation of elevator door load on every floor. Automatically rectifying the most appropriate open / shut speed in every floor so as to guarantee the security and reliability.

6, Photocell protection
Suxun elevator utilizes the sensitive and concentrative infrared ray photocell to form optical curtain protection safety net at the entrance of the lift. It sensitively reacts to any person or object that enters into the probe plane freely entering in & out with high security.

7, The humanized function options
Suxun small (roomless) machine passenger elevator can add various operation functions to satisfy all kinds of the humanized requirements according to the users'demands. For example, intellectual lift dispatch can not be used without way-leave. Only Intellectual IC Card Users can reach certain floors.  We target upon the old and handicapped residents' requirements to develop lift in the wheelchairs.  These functions can effectively protect the inhabitants' right and safety, decrease the invalid elevator travel. Such lifts can be easily used by special groups.  Meanwhile it also cuts down the property management cost.

8, Group control managing system
Group control managing system is that same model lifts are controlled together, the lift groups can automatically choose the most appropriate response. It avoids the repeated lift parking, reduces the passengers'waiting time and improves the travel efficiency.

9, Remote monitor can follow commands from a long distance away
Remote monitor center implements a real-time monitor to the lift travel conditions and passenger conditions in the lift through the wired or wireless communication module. The trouble can be removed even before happening.  Prevention is better than cure. In this way, the passengers' safety can be guaranteed.
Standard Function – Passenger Elevator
1, Travel function
VVVF drive
Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and
stop and gain the sound comfort.

VVVF door operator
Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start / stop.

Independent running
The lift can not respond to outer calling, but only respond to the command inside the car through the action switch.

Automatic pass without stop
When the car is crowded with the passengers or the load is closeto preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency.

Automatically adjust door opening time
Door-open time can be automatically adjusted according to the difference between landing calling or car calling.

Reopen with hall call
In the door shutting process, press reopen with hall call button can restart the door.

Express door closing
When the lift stops and opens the door, press door-shut button, the door will be closed immediately.

Car stops and door open
The lift decelerates and levels, the door only opens after the lift comes to a complete stop.

Car arrival gong
Arrival tong in the car top announces that the passengers arrive.

Command register cancel
If you press the wrong floor command button in the car, twice continuous pressing of same button can cancel the registered command.
2, Safety function
Photocell protection
In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.

Designated stop
If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor.

Overload holding stop
When the car is overload, the buzzer rings and stops the lift in the same floor.

Anti-stall timer protection
The lift stops operation due to slippery traction wire rope.

Start protection control
If the lift does not leave door zone within the designated time after it gets started, it will stop the operation.

Inspection operation
When the lift enters into inspection operation, the car travels at inching running.

Fault self-diagnosis
The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation.

Repeated door closing
If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated.

Up/down over-run and final limit protection
The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of the control.  It results in the more safe and reliable lift travel.

Down over-speed protection device
When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed.  If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety.

Upward over-speed protection device
When the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift.
3, Man-machine interface
Micro-touch button for car call and hall call
Novel micro-touch button is used for operation panel command button in the car and landing calling button.

Floor and direction indicator inside car
The car shows the lift floor location and current travel direction.

Floor and direction indicator
The landing shows the lift floor location and current travel direction.
4, Emergency function
Emergency car lighting
Emergency car lighting automatically activated once power failure.

Inching running
When the lift enters into emergency electric operation, the car travels at low speed inching running.

Five way intercom
Communication amid car, car top, lift machine room, well pit and rescue duty room through walkie-talkie.

Bell
In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell rings on top of the car.

Fire emergency return
If you start key switch in main landing or monitor screen, all the callings will be cancelled.  The lift directly and immediately drives to the designated rescue landing and automatically opens the door.

Energy-saving function

Car ventilation, light automatic shut off
If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy.

Remote shut-off
The lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service.
Optional Function
1, Emergency function
Leveling when power failure
In normal power failure, the chargeable battery supplies the lift power.  The lift drives to the nearest landing.
2, Travel function
Anti-nuisance
In the light lift load, when three more commands appear, in order to avoid the unnecessary parking, all the registered callings in the car will be cancelled.

Open the door in advance
When the lift decelerates and enters into door open zone, it automatically opens the door to enhance the travel efficiency.

Direct parking
It completely accords with distance principle with no crawling in the leveling.  It greatly enhances the travel efficiency.

Group control function
When three or more same model lift groups are controlled in use, the lift group can automatically choose the most appropriate response.  It avoids the repeated lift parking, reduces the passengers' waiting time and increases the travel efficiency.

Duplex control
Two sets of same model lifts can unanimously respond the calling signal through the computer dispatch.  In this way, it reduces the passengers' waiting time to the greatest extent and enhances the travel efficiency as well.

On-duty peak service
Within the preset on-duty time, upward transport from the home landing is extremely busy.  The lifts are continuously dispatched to the home landing in order to satisfy on-duty peak service.

Off-duty peak service
Within the preset off-duty period, the lifts are continuously dispatched to top floor in order to satisfy off-duty peak service.

Door open time extending
Press special button in the car, the lift door keeps open for certain period of time.
3, Man-machine interface
Voice announcer
When the lift normally arrives, voice announcer informs the passengers about the relevant information

Car assistant operation box
It is used in the large loading weight lifts or the lifts with crowded passengers so that more and more passengers can use the car.

Operation box for the handicapped
It is convenient for the wheelchair passengers and those who have vision problems.

Intelligent calling service
The car command or hoist-way calling can be locked or connected through special Intelligent Input.

IC card control function
All (partial) landings can only input car commands through IC Card after the authorization.

Monitor function

Remote monitor
The lift long-distance monitor and control can be fulfilled through modem and telephone.  It is convenient for the factories and service units to timely know the travel conditions of every lift and promptly take the corresponding measures.

Remote control
The lift can have independent travel according to the specific requirements through operation monitor screen (optional).

Camera function in the car
The camera is installed in the car to monitor the car conditions.