Wireless Kit:
Wireless RCA video transmitter & receiver kit for car rear view camera
Wireless RCA video receiver/transmitter; avoid complicated wiring, to be used with in-car monitor, head unit, DVD player and camera, etc.
Receiver/transmitter frequency: 2370MHz
Av in/out: PAL/NTSC Composite video signal, RCA Jack
Receiver/transmitter distance: 50m (in jam-free open areas)
Car Monitor:
Screen size: 4.3 inch Display Format:16:9Contrast:300:1,Resolution:480x240
Power Voltage:12V DC,Power Consumption; <=6W
Item type:Parking Assistance
Operate System:PAL/NTSC
Video Input:V1/V2.auto switch
Operating Voltage:DC 9V-16V
Storage temperature:0~40 degree Celsius
Operation temperature:-20-60 degree Celsius
Car Make:All Car
No Audio Input or Output
Car Camera:
Image sensor: CCD 3030 (Distance reference marking display)
Resolution:480TV line
Lens angle:2.8mm(150deg)
S/N Ratio:Better than 48dB
Power:12V DC(+/-10%)
Waterproof grade:IP68
Waterproof body construction with wide view angle
How to Install a Camera with the Wireless Module:
Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your reverse car.
