Model NO.
ET-01_O
Classification
Gps Tracker
Voltage
DC 12V
Function
Anti-theft Warning, GSM Network Remote Real-time Monitoring
Type
GSM
Transport Package
in Gift Box
Specification
CE
Origin
China
HS Code
8526919090
1. Small size
2. Accurate locating
3. Easy installing
4. Blind area compensation
5. Power saving mode
6. Support UDP & TCP protocol
7. Support GPS & Glonass system
Advantage:
1. Fast and accurate locating
2. Low power consumption
3. Built-in reset controller ensures system not stuck
4. High sensitivity G-sensor
5. Self-recovery fuse to protect circuit from short circuit.
Main functions:
1. LBS, GPS and A-GPS tracking
2. Real-time Tracking
3. Geo-fence
4. Remote controlling fuel/power supply
5. Engine ignition detection
6. Vibration detecting alarm
7. Over speed alert
8. External power cut alert
9. Audio monitoring (optional)
Installation:
Plug the OBD connector into the OBD port of vehicle.After connected the cables, just insert SIM card, device will turn on power.
Very easy to operate!
Note: device cannot get wet by rain, the device side with "This side up" marking should be upward, and there is no metal sheet above the device.
Technique Specification:
Size: 40*58*14.5mm
Working voltage: 6 to 30V DC
Input fuse: 2A
Working temperature: -20 to 85°C
Humidity: 10% to 90% RH
CPU: MT6261 (260MHz)
GSM module:
Highly precise and low noise RF transmitter for GSM/GPRS applications
Transmitter outputs support quad bands: 850/900/1800/1900MHz
GPRS class 12
GPS module:
GPS chip set: U-BLOX 8
Fast acquisition
operational temperature from -40°C to +105°C,
lowest current consumption
Navigation sensitivity: -167 dBm
Improved jamming immunity, spoofing detection
Current:
Power-saving mode: 4mA
working current: 60 to 150mA
Charging current: <500mA maximum
