Model NO.
M3 OBD2 Head Up Display
Type
Unidirectional
Main Market
All Country
Transport Package
Standard Package
Origin
China
HS Code
85285990
Production Capacity
500000/Month
After-sales Service:
1year
Warranty:
1year
Classification:
Head up Display
Voltage:
12V
Function:
Head up Display
Certification:
CE
3.2inch car head up display M3 OBD2 HUD Overspeed Warning Windshield Projector digital electronic Auto Accessories
Please note:
Please disconnect the HUD if you don't drive for more than a week.Generally speaking car battery's standby time is 1 month,we kindly suggest you to unplug the OBD device when the car is not used for a long time due to different vehicle conditions.
Main Function:
1.Multifunction: Speed, Water temperature, Voltage
2.Engine icon, Water temperature icon
3.Voltage icon, Fatigue driving icon
4.Light sensor:HUD can automatically adjust the brightness according to the environment
5.Speed unit: MPH- mile,KM/H- kilometer
OBD Troubleshooting:
1.The screen without any display, and no power
Please do these operations: If OBD cable is tight enough,pull the OBD cableoutseveral times. Try another car to test.
2.When HUD power on,HUD only shows the car voltage and be automatic power off after 30 seconds driving.
HUDis onlyavailable for cars with OBD2and EOBD agreement(European:manufactured after 2003, Other region: after 2007)
HUD Products don't support JOBD and OBDI,if your car is these agreement(manufactured before 2008),pleasereplace with other cars that comply with OBD2 interface.
3.Wrong operation lead to crashes
A.If your car equip with other OBD devices (parking sensor, TPMS monitor,car window closer,ELM27)
B.If your car had been modified(central control navigation,electronic throttle controller,speed cruise,refresh the computer system,One-click start-up,keyless entry,remote startup)will cause a crash,unplug other OBD devices and do the factory settings (more details please refer to the menu table), unplug the one-point two-wire and use the HUD alone orreplace with other cars.
4. Inaccurate speed
In the case of power-on,longpressthe 'M'button into enterintomenu option,menu displays 1,parameter displays 107.Fine tuning of the values according tothe difference betweenHUD and car instrument(Example:the instrument displays 100 KMbut HUDdisplays 105KM,then calculation should be default value 107-5=102.Longpress the 'M'buttontosave your adjustment andexit.
5. The carsare with Automatic start/stop systemand Hybrid electric vehicle
After the car starts and stops automatically, the engine stops running. The HUD shuts down after 20 seconds. Theturn off voltagecan be adjusted to1VinMenu10.
6.HUD can not auto power off(RPM or Speed not at0)
When HUD is power on,long press the buttoninto enter into menu,setthe voltage from 0 to 13.2V or 13.5V(Menu 10).HUD will turn off after 3 minutes.
7.HUD will automatically restart
Indicates that thecarvoltage is higher than the starting voltage 13.2 volts,what you should do istoset voltage to13.6-13.8V(Menu).HUD will automatically on when voltage is higher than 13.2v.
Please note:
Please disconnect the HUD if you don't drive for more than a week.Generally speaking car battery's standby time is 1 month,we kindly suggest you to unplug the OBD device when the car is not used for a long time due to different vehicle conditions.
Main Function:
1.Multifunction: Speed, Water temperature, Voltage
2.Engine icon, Water temperature icon
3.Voltage icon, Fatigue driving icon
4.Light sensor:HUD can automatically adjust the brightness according to the environment
5.Speed unit: MPH- mile,KM/H- kilometer
OBD Troubleshooting:
1.The screen without any display, and no power
Please do these operations: If OBD cable is tight enough,pull the OBD cableoutseveral times. Try another car to test.
2.When HUD power on,HUD only shows the car voltage and be automatic power off after 30 seconds driving.
HUDis onlyavailable for cars with OBD2and EOBD agreement(European:manufactured after 2003, Other region: after 2007)
HUD Products don't support JOBD and OBDI,if your car is these agreement(manufactured before 2008),pleasereplace with other cars that comply with OBD2 interface.
3.Wrong operation lead to crashes
A.If your car equip with other OBD devices (parking sensor, TPMS monitor,car window closer,ELM27)
B.If your car had been modified(central control navigation,electronic throttle controller,speed cruise,refresh the computer system,One-click start-up,keyless entry,remote startup)will cause a crash,unplug other OBD devices and do the factory settings (more details please refer to the menu table), unplug the one-point two-wire and use the HUD alone orreplace with other cars.
4. Inaccurate speed
In the case of power-on,longpressthe 'M'button into enterintomenu option,menu displays 1,parameter displays 107.Fine tuning of the values according tothe difference betweenHUD and car instrument(Example:the instrument displays 100 KMbut HUDdisplays 105KM,then calculation should be default value 107-5=102.Longpress the 'M'buttontosave your adjustment andexit.
5. The carsare with Automatic start/stop systemand Hybrid electric vehicle
After the car starts and stops automatically, the engine stops running. The HUD shuts down after 20 seconds. Theturn off voltagecan be adjusted to1VinMenu10.
6.HUD can not auto power off(RPM or Speed not at0)
When HUD is power on,long press the buttoninto enter into menu,setthe voltage from 0 to 13.2V or 13.5V(Menu 10).HUD will turn off after 3 minutes.
7.HUD will automatically restart
Indicates that thecarvoltage is higher than the starting voltage 13.2 volts,what you should do istoset voltage to13.6-13.8V(Menu).HUD will automatically on when voltage is higher than 13.2v.
Send Message
