Model NO.
UF-06AC/8KW/10KW/20KW/30KW/40KW/60KW/100KW/160KW
Working Way
Auto/Manual/Remote
Application
Quenching, Soldering, Brazing, Hardening
Package
Export Wooden Box
Model
Mosfet Type or IGBT
Power Factor
0.93
Water Cooled Tempeture
40c
Water Pressure
>0.12MPa
Protection Level
Over Current/Voltage, Lack Water, Phase Fail etc
Work Cycle
100% 24 Hour Without Stop
Delivery Time
2-3 Work Days, Fast Shipping
Certification
CE, ISO
Structure
Vertical Type
After-sales Service
24hours*7days, Free Parts
Warranty
18months From Delivering, 12 Months Receiving
Brand
Ord
Transport Package
Wooden Box
Specification
CE, SGS, ISO
Trademark
ORD
Origin
China
HS Code
8514400090
Production Capacity
10, 000sets
Type:
Induction Heating Machine
Power:
5kw/8kw/10kw/20kw/30kw/40kw/60kw/100kw/160kw
Frequency:
1.5MHz/100-250kHz
Input Current:
7.5A, 12A/15A/30A/45A/60A/90A/150A/240A
Work Voltage:
220V*Simple Phase, 380V/415V/440V/480V*3phase
Work Frequency:
50-60Hz
Ultrahigh Frequency Induction Heating Machine for Brazing/Soldering/Quenching/Hardening/Welding:
1, It adopts the most advanced MOSFET, Siements IGBT power tube and particular second generation inversion technical.
2, It could adjust the power time in heating retain and advance the quality and repeatability of heating, predigest the operation technical for worker.
3, Easy installation, it can be used once it is connected with single phase (220V) power supply, induction coil as well as water supply pipe and rising pipe.
4, It is small in size and light in weight, easy operation, you could learn in several minute, also it's very safe. Output power lower then 36V, elimination of high voltage.
5, Heating efficiency will over 95%, as compared with vacuum tube high frequency equipments, it can save the power by approximately 70%.
6, The induction coil could free dismounting and change more convenience. Fast heating speed and it could reduce the workpiece will be oxidation and transmutation.
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation,
equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises
related to quality assurance and operation guarantee.
1, It adopts the most advanced MOSFET, Siements IGBT power tube and particular second generation inversion technical.
2, It could adjust the power time in heating retain and advance the quality and repeatability of heating, predigest the operation technical for worker.
3, Easy installation, it can be used once it is connected with single phase (220V) power supply, induction coil as well as water supply pipe and rising pipe.
4, It is small in size and light in weight, easy operation, you could learn in several minute, also it's very safe. Output power lower then 36V, elimination of high voltage.
5, Heating efficiency will over 95%, as compared with vacuum tube high frequency equipments, it can save the power by approximately 70%.
6, The induction coil could free dismounting and change more convenience. Fast heating speed and it could reduce the workpiece will be oxidation and transmutation.
| Input voltage | AC220V 50HZ |
| Input current | 23A |
| Output power | 5000W |
| Min power | >40W |
| Fluctuating frequency | 1.5MHZ |
| Weight | Main:430 x280 x90mm |
| Part:230 x 100 x 115 mm | |
| Net weight | 10.8KG |
| Working method | Continue |
| Working environment and temperature | Nearly have not dust, lower then 40C in door |
| Cooling | The water under degree 40C |
| Working condition | Can not adjust output power |
| Type | UF-20KW |
| Work power | 3×380V(415V,440V,480V) |
| The range of operating voltage | 340-430v |
| Output power | 20KW |
| Heating current | 5-45A |
| Fluctuating frequency | 100-250KHZ |
| Timing | 0.1-99.9S |
| The flow rate of cooling water | >0.2Mpa >5L/min |
| Water temperature protection point | 40ºC |
| Duty cycle | 100%(40degree room temperature) |
| Weight | 28+27kg |
| Size | 52×26×52cm 50×26×37 cm |
| Type | UF-40KW |
| Work power | 3×380V(415V,440V,480V) |
| The range of operating voltage | 340-430v |
| Output power | 40KW |
| Heating current | 10-100A |
| Fluctuating frequency | 80-200KHZ |
| Timing | 0.1-99.9S |
| The flow rate of cooling water | >0.2Mpa >5L/min |
| Water temperature protection point | 40ºC |
| Duty cycle | 100%(40degree room temperature) |
| Weight | 45+42kg |
| Size | 65×35×55 cm 55×30×40 cm |
| Type | UF-60KW |
| Work power | 3×380V(415V,440V,480V) |
| The range of operating voltage | 340-430v |
| Output power | 60KW |
| Input current | 90A |
| Fluctuating frequency | 100-250KHZ |
| Timing (Heat time, Retain time ) | 0.1-99.9S |
| The flow rate of cooling water | >0.2Mpa >5L/min |
| Water temperature protection point | 40ºC |
| Duty cycle | 100%(40degree room temperature) |
| Weight | 32+28kg |
| Size | 64×35×55 cm 51×30×45 cm |
| Type | UF-100KW | |
| Work power | 3×380V(415V,440V,480V) | |
| The range of operating voltage | 340-430v | |
| Output power | 100KW | |
| Input current | 150A | |
| Fluctuating frequency | 100-250KHZ | |
| Timing | 0.1-99.9S | |
| The flow rate of cooling water | >0.2Mpa >5L/min | |
| Water temperature protection point | 40ºC | |
| Duty cycle | 100%(40degree room temperature) | |
| Weight | 65+50kg | |
| Size |
|
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation,
equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises
related to quality assurance and operation guarantee.
Send Message
