Model NO.
SDJ3400
Power
Electric
Supply
Portable Hand Extruder Plastic Rods Welding machine
Warranty
1 Year
Certification
ISO, Ce
Voltage
220-230V
Weight
4.8kg
Type
Plastic Welders
Current
Alternating Current
Transport Package
Wooden Box
Specification
ISO, CE
Trademark
SUD
Origin
China
HS Code
85152900
Production Capacity
1000sets/Years
Application:
Hand Extruder Welding Machine
Cooling Way:
Air Cooling
Control:
Semi-Automatic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
Portable Hand Extruder Plastic Rods Welding Machine/Extrusion Machine/Plastic Welder
1. Preheating wind and screw extruder Integrated Design
2. With small size, light weight, easy to carry
3. Welding high strength, good sealing effect, the weld width, the quantity, speed, a welding molding
4. Own wind source, particularly suitable for field-site construction work
| Model | SDJ3400 |
| Voltage | 220V |
| Frequency | 50/60HZ |
| Extruder power | 1100W |
| Hot Air Power | 1600W |
| Welding Rod Heating Power | 800W |
| Welding speed | 2-2.5kg/h |
| Electrode size | Ø3.0-4.0mm |
| Net Weight | 8kg |
=====>>Operation procedures
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
2) Open the control box switch, welding temperature is generally set at 300 ° C, Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.
3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods.
4)Thenair temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °
5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.
6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
=====>>Product Features
1)Imported hot air welding torch and imported driven system, high temperature, big torque, long service life, stable performance.
2)Light weight, easy to handle and available to operation at different angles.
3)Big extrusion volume can be welded more than 10mm welding seam.
4)Different welding shoes can be applied to different types of welding.
5)It is used in the tank and pipe and comply with Part 4 of the DVS standard (Germany Welding Association)
Send Message
