Cyclone dust collector is a kind of dust collection device, with the working principle shown as below: The dust-contained gas enters tangentially from the inlet; when the gas flow is in rotational movement, the upper and lower parts of gas flow are separated to form dual-vortex motion; and a strong separation effect is caused to the dust in the boundary of dual vortexes, with the coarse dust particles led to the external wall by the lower vortex gas flow, some led out from the middle hole of bypass separation room, and the remaining brought into dust hopper by downward gas flow. The upper vortex gas flow has the effect to gather the fine dust particles, so as to improve the dust collection efficiency. Such part of fine particles are led to upper part by upper vortex gas flow to form a strongly rotating upper dust ring under the cover ,enters into the upper hole of bypass separation room, and then is led into the cone body through return air inlet to converge with the internal air flow as a result, the cleaned gas is discharged from the exhaust pipe while the separated dust enters into hopper.
Main Features
1) Simple structure and easy in installation and maintenance.
2) Good air tightness, protect environmental friendly.
3) Remove ash or slag under the dust collector.
4) Multiple points of load and unload.
5) Improve worker's labor condition notably.
6) Be widely used in in metallurgy and waste to energy industries.
Parameter:
Model |
Inlet dust concentration | Inlet velocity 12m/s | nlet velocity 15m/s | Inlet velocity | |
model No. |
Diameter(mm) | Allowed dust concentration(g/m3) | Gas volume | Gas volume | Gas volume |
CLT/A2.0 | Ø200 | 150 | 300 | 370 | 440 |
CLT/A2.5 | Ø250 | 165 | 460 | 580 | 690 |
CLT/A3.0 | Ø300 | 180 | 670 | 8330 | 1000 |
CLT/A3.5 | Ø350 | 190 | 910 | 1140 | 1360 |
CLT/A4.0 | Ø400 | 200 | 1180 | 1480 | 1780 |
CLT/A4.5 | Ø450 | 225 | 1500 | 1870 | 2250 |
CLT/A5.0 | Ø500 | 250 | 1860 | 2320 | 2780 |
CLT/A5.5 | Ø550 | 275 | 2240 | 2800 | 3360 |
CLT/A6.0 | Ø600 | 300 | 2670 | 2340 | 4000 |
CLT/A6.5 | Ø650 | 325 | 3130 | 3920 | 4700 |
CLT/A7.0 | Ø700 | 350 | 3630 | 4540 | 5440 |
CLT/A7.5 | Ø750 | 375 | 4170 | 5210 | 6250 |
CLT/A8.0 | Ø800 | 400 | 4750 | 5940 | 7130 |
Our service
1. Enquiries quickly reply within 24 hours.
2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours. We can arrange professional engineers arrived at equipment location within 48 working hours for problem solved.
3. The dust collector design according to the specific condition of dust removal technology. The wind network project design for all system. To be the optimal structure design.
4. The lowest equipment price whole network in alibaba Welcome to rate of the price. If our price is higher, we will return twice of our quoted price difference to you. Please prompt before sign the contract with us. Due to our good faith principle.
