Industrial Vacuum Cleaner Cyclone Dust Extractor, Cyclone Dust Extractor, Ndustrial Vacuum Cleaner

D7 industrial vacuum cleaner cyclone dust collector

Main Introduction of D7 industrial vacuum cleaner cyclone dust collector
D7 industrial vacuum cleaner cyclone dust collector integrates the advantage of cyclone vacuum system and bagging vacuum cleaner ,the dust collection and filtration are carried out simultaneously,
D7 industrial vacuum cleaner cyclone dust collector is being widely used in the construction, building, chemical and other industrial for cleaning the dust, and protect the environment.

Working Method of D7 industrial vacuum cleaner cyclone dust collector
The dust that is generated by the floor grinding machine enters the first chamber, it is cyclonically separated.
the heavy dust goes down and the finer travel up. ( most of the dust can be collected in the first chamber) 
then airstream goes into the second chamber, where remaining dust is filtered. 
there is an air gun equipped with the machine, so you can blow clean the filter and the machine after working. 

Main Parameter of D7 industrial vacuum cleaner cyclone dust collector

 
It is equipped with a telescopic frame which can be used:
In the "high position" while working to greatly amplify the "cyclone effect" and the filtering power.
The higher is the filter chamber, the easier is the separation of dust from the air, resulting in less clogging of filters.
In the "low" position for transportation in order to reduce its dimensions and to be easily loaded even in small vans.