Model NO.
LCMD
Assembly Method
Bolted
Filter Bag
PPS
Filter Area
4800m2
Transport Package
Pieces in Standard Container
Specification
LCMD4800
Trademark
JY
Origin
China
HS Code
8424899990
Production Capacity
200 Sets Per Year
Installation Method:
Vertical
Operation Type:
Fully automatic
Medium Material:
Glassfiber
Dust Collecting Method:
Dry
Type:
Fabric Dust Collector
Name:
Bolted Type Dust Collector
LONG FILTER BAG BOLTED TYPE BAG FILTER DUST COLLECTOR FOR STEEL PLANT
Dust treatment and purification collection in mining, grain processing, flour, electronics industry, wood processing, etc
Dust treatment and purification collection in mining, grain processing, flour, electronics industry, wood processing, etc
The induction furnace dust removal system consists of dust hood, air duct, electronic valve, mixed valve, bag filter, draught fan,chimney and electrical control system. After the smoke and dust from the intermediate frequency furnace were generated by the dust hood, they enter the dust collector through the adjusted butterfly valve and the air inlet pipe ,to collect large particles and play a role of flame retardance. Then, the dust is trapped outside the filter bag by the pulse bag type dust collector. Finally, the dust collected by the dust collector and the bagged dust collector is recycled through the swing valve.
After the flue gas from the feed inlet of induction furnace is collected by the dust hood and passes through the adjusted
butterfly valve. The dust enters the bag filter through the dust collecting pipe. At this time, the large particles in the dust
are separated by the dust collector by gravity. The large particles enter the dust hopper of the dust collector and the fine
particles enter the bag filter. The dust adhered to the surface of the bag is concentrated in the dust hopper of the dust
collector through the filter bag filtration and pulse blowing. The dust is recovered or utilized by the controller. The clean air
after being treated by the bag filter is discharged through the draught fan. Finally, it is discharged into the atmosphere through the chimney. The dust collected by the bag filter is discharged through the flap valve. The system process is as follows:
are separated by the dust collector by gravity. The large particles enter the dust hopper of the dust collector and the fine
particles enter the bag filter. The dust adhered to the surface of the bag is concentrated in the dust hopper of the dust
collector through the filter bag filtration and pulse blowing. The dust is recovered or utilized by the controller. The clean air
after being treated by the bag filter is discharged through the draught fan. Finally, it is discharged into the atmosphere through the chimney. The dust collected by the bag filter is discharged through the flap valve. The system process is as follows:
Flue gas treatment and dust removal systems in iron works, steelworks, ferroalloy plants, refractory plants, foundries, power plants, etc. Flue gas filtration for waste incinerators, coal-fired boilers, fluidized bed boilers, etc. Asphalt concrete mixing, building materials, cement ceramics, lime, gypsum and other production sites. Smelting flue gas filtration of aluminum electrolysis, lead, tin, zinc, copper and other rare metals, recovery of fine materials, separation of liquid and solid. Liquid-solid separation and fine material recovery in chemical, coke, carbon black, dye, pharmaceutical, plastic and other fields.
Send Message
