15L Centrifugal Barrel Polishing Machine
Barrel finishing machines provide the most economical, high speed finishing available. kafan machines operate on the "ferris wheel" principle with a 1:1 ratio of barrel rotation to turret rotation. Four barrels are mounted at the periphery of a large turret. Each barrel is loaded to approximately 50 - 90% full with media, parts and water. During operation, rotation of the turret creates force on the media and parts inside each barrel. The force reduces the cycle time needed to complete the finishing of the parts by up to a factor of 30 over conventional vibratory and barrel finishing.
Centrifugal barrel Finishing Machine Specifications
We offer centrifugal barrel machines in a wide variety of sizes to fit any production need
| Model | Capacity | Motor Power | Speed | Inner Lining | Weight | Size(L*W*H) |
| CL-15 | 2*7.5L | 1.1kw | 185r/min | 5-8mm | 200kg | 850*880*980mm |
| CL-30 | 4*7.5L | 1.5kw | 185r/min | 5-8mm | 350kg | 970*990*1175mm |
| CL-40 | 4*10L | 2.2kw | 165r/min | 6-10mm | 800kg | 1100*1000*1400mm |
| CL-60 | 4*15L | 5.5kw | 165r/min | 8-12mm | 1000kg | 1150*1100*1700 |
| CL-80 | 4*20L | 5.5kw | 145r/min | 8-12mm | 1200kg | 1300*1250*1815mm |
Features of Kafan Centrifugal Barrel Finisher
Wear resistant and long life polyurethanes lining of the inner barrel,
An arc-shaped sliding cover shields the base, start the machine with cover closed to ensure safety and keep quiet.
Variable speed meets different finish desires from light polishing to heavy deburring or edge cutting.
Centrifugal barrel finishing machines catalogue
