This machine is mainly designed for grinding the cutting edge of spiral milling cutter. It has reasonable structure, convenient adjustment and easy to understand. It can grind one milling cutter in 2 minutes, and can repair the back angle, wiper edge and end face of milling cutter at the same time. Blade angle and so on. The air bearing is the principle of air suspension. After the air pressure is applied, the main shaft is in a suspended state, light and free, and there is no friction. The spindle is equipped with a 5C spindle, which can be used to repair the straight shank cutter 2-25MM. For example, the tool such as the grinding knife and the three-sided blade can be ground up to 245, the length is 260mm, and the spindle can be replaced with the Mohs 4# spindle hole. Grinding ball knives, three-sided milling cutters, reamers, turning tools, carving knives, etc.!
Main technical parameters: Metric MM Inch INCH
Grinding cutter range (shank diameter × blade diameter × length) 50 × 225 × 250mm 2 " × 9 " × 10 "
Table rotation diameter 245mm 9-3/4"
Worktable lateral travel (X-axis) 150mm 6"
Table longitudinal stroke (Y axis) 75mm 3"
Maximum shape of the bowl-shaped grinding wheel (outer diameter × thickness × aperture) 125×52×32mm 5"×2"×1-1/4"
Grinding head angle adjustment range +35°-5° +35°-5°
Air bearing rotation angle 360° 360°
Air bearing stroke 250mm 10"
Worktable minimum feed unit 0.01mm 0.001
Supply pressure ≥0.63MPa ≥0.63MPa
Pipe joint aperture Z1/4" Z1/4"
Spring chuck with spindle hole 5C
The parallelism of the two tables moving to each other 0.01/100mm
The parallelism of the sleeve center line to the table movement 0.01/100mm
Speed: 2880rpm
Voltage: 220V, 380V
Power: 0.37KW 1/2HP
X6 milling cutter grinding machine
Standard:
1, the host + air bearing = 1
(Note: 5C and Mohs 4# holes are optional)
2, 125MM resin grinding wheel = 1
3, 125MM white steel jade wheel = 1
4, 5C collet = 5 or Mohs 4 # collet = 3 (3 ~ 25 optional)
5, wrench tools = 1 set
6, manual = 1
Optional:
1, workbench
2, ball knife accessories
3, Mohs MS4, 5C spindle
4, Mohs MS4 magazine (3 ~ 25)
5, 5C cartridge clip (3~25)
6, MS4-ER tool holder (MS4-ER50)
