Model NO.
NEOMIG
Lift DC TIG
Available
MMA
Available
Transport Package
Honeycomb Box
Specification
64*32*48cm
HS Code
8515390000
Production Capacity
20000PCS/Month
Cooling Way:
Air Cooling
Shielding Gas:
Ar/CO2
Control:
Semi-Automatic
Frequency Range:
50/60Hz
Electric Current:
DC
Flux:
Available
The NEOMIG welder is an inverter-based portablefull-bridge welding machine combined with GMAW,FCAW,SMAw and DC LIFT TIG WELDING.Easy Stepless adjustment of voltage and wire feedbrings quick setting of welding parameters givingexcellent and professional welding results. Wire inchgives easy feeding of he wire during set up withoutgas wastage and the Burn Back adjustment leaves thewire out ready for the next weld.
The unit works with elecrode for stick welding also.DC LIFT TIG is available trough scratching arc start byoptional TIG-17V torch.
Inbuilt Advanced Function for MMA welding
- ANTI-STICK - HOT-START- ARC-FORCE is available
lnductance Regulation for MIG/MAG welding
- A.Adjust the welding softness for satisfying theuser's welding habit.
- B.Adjust the penetration, ensure the adhesion of theweld bead,realize the consistent penetration of theworkpiece, and improve the welding quality of theworkpiece
Quick ARC-START and Wave Controlfor MIG/MAG welding
Stabilized the small current transition, Reduce thesplash of large current by 70%~80%,The constant
current arc starting improves the arc starting to 100%.Adopt analog circuit high-speed and accurate control
technology, to achieve precise control of each droplet transfer and high-speed welding.High penetration rateand excellent weld bridging ability, realize the wide gap welding and high weld quality. Ultra-low heat input cancontrol the formation of weld and minimize the deformation.
Poweful wire feeder driven by 45Watt electric motor,and it supplies high effeciency and stable feedingspeed, up to 15m/min.
Quick Select Drive roll help you setup quickly byoffering grooves for solid wire and flux-cored wire.Smooth-start provides a smooth,spatter-free arcstarting.
Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked orduty cycle is exceeded.Automatically resets when itcools.
| Model | NEOMIG-180 |
| Type | IGBT |
| Rated Input Voltage (V) | 220 |
| Rated input frequency (Hz) | 50/60 |
| Rated input Power (KVA) | 6.5 |
| Non-load Voltage (V) | 60 |
| Output current MIG/MAG (A) | 180 |
| Output current TIG LIFT (A) | 160 |
| Output current MMA (A) | 160 |
| Rated Duty cycle (%) | 60% |
| Efficiency (%) | 85% |
| Class of Insulation | F |
| Shell protection grade | IP21S |
| Suggested Electrode Max | 5 mm |
| Suggested Welding Wire Dia | 0.6/0.8/1.0/1.2 |
| Connector size | 13mm |
| N.W./G.W. (kg) | 11.5/18KG |
Send Message
