LS5TY-A HYDRAULIC PRESSURE COLD WELDER CAR TYPE
| Model | J0 | J1 | J2 | J3 | J5 |
| Wire range for Cu(mm) | 0.045-0.15 | 0.10-0.50 | 0.30-1.20 | 1.00-3.25 | 4.00-8.00 |
| wire range for Al(mm) | 0.07-0.15 | 0.10-0.50 | 0.30-1.40 | 1.00-5.00 | 4.00-15.00 |
| Size(mm) | 150*40*155 | 160*50*160 | 220*160*230 | 280*180*300 | 1190*570*1100 |
| Weight(kg) | 0.5 | 0.65 | 11 | 33 | 650 |
Compared with electric welding machine:
1: The electric welding machine requires skilled operators and has certain requirements for welding skills.
2: The bulge generated at the electric welding seam, the subsequent treatment is very troublesome.
3: The strength of the joint of the copper rod after electric welding is only about 80% of the original copper rod. In the later drawing process, there may be wire breakage.
For Cu:4.00mm-8.00mm,Al4.00mm-15.00mm
Our company has a complete set of advanced processing equipment and testing means. As our production is in streamline form, all produced sizes are up to the standard of our company. The key holes are bored by jig borer, thus avoiding the accumulated errors processed with several drillers. As a result , the tolerance and matching are excellent, parts can be interchangeable, thus guaranteeing the products to be high quality and good performance.
In order to guarantee long life of our products, all castings used in our cold welders are made of high class nodular cast iron. Cast steel is 45# and is made of high quality precision casting, The V-shaped blocks and cams are american brand D2 steel. The steel is heattreated by a professional foreign enterprise strictly according to technical requirement of our company. Before putting it into use, the american steel is inspected by our inspection department, to guarantee its abrasion resistance and its undeformed ability.
Relying on the used experience gained by our several thousands customers, We calculate out an ideal diameter size for arm shaft and handle shaft. We use high quality spring steel and treat it with tempering, to improve its solidity, and to avoid suchlike frequent encountered problems as breaking or curving in time of using these two shafts.
| Model | J0 | J1 | J2 | J3 | J5(with 5.5KW) |
| Wire range for Cu(mm) | 0.045-0.15 | 0.10-0.50 | 0.30-1.20 | 1.00-3.25 | 4.00-8.00 |
| wire range for Al(mm) | 0.07-0.15 | 0.10-0.50 | 0.30-1.40 | 1.00-5.00 | 4.00-15.00 |
| Size(mm) | 150*40*155 | 160*50*160 | 220*160*230 | 280*180*300 | 1190*570*1100 |
| Weight(kg) | 0.5 | 0.65 | 11 | 33 | 650 |
For cold welding machine , pls inform :
About cold welder(cold welding machine)
The merit of cold welding means simplicity in operation,with no need of extraordinary skill.With the method it is possible to ensure the reliability of welding,it is the most reliable and the most economic method to joint nonferrous wires and their allbys.
