Model NO.
DNW3
Welding Spot Number
Multiple
Type
Special
Welding Current
AC or DC
Transport Package
Wooden Case
Specification
export standard
Trademark
xinchang
Origin
Ningbo China
HS Code
85152900
Production Capacity
500sets/Year
Control:
Semi-Automatic
Cooling Way:
Water Cooling
Style:
Fixed
Electrode Stroke:
Vertical
Transmission:
Pneumatic
Conductive Way:
Both-Sided
Features:
- This machine is multi head type structure, can weld multi-spot for one time.
- Control system: Microcomputer control, can store 15 sets welding schedule which can be adjust independently, very easy to achieve one or more electrode welding parameters independently djusted so as to achieve welding requirements for different sizes, different shapes products.
- Users can set by himself action sequence, number and welding schedule of cylinder, to achieve the welding requirements on different products.
- Large screen display intuitive and clear.
- Data set and adjusted by touch switch, easy and fast.
- Machine body of thick steel sheet, not easy to deformation, good rigidity.
- Water cooling transformer: Use silicon sheets of 15000 gauss permeability to pile up. There is cooling water in inside, using full copper alloy core not aluminum, reducing impedance, improving the utilization of power, 20% duty cycle to ensure the requirement of long time welding, big output power. The useful lifetime is longer, noise is smaller, structure is more compact and reasonable.
- Fast solenoid valve, making welding speed faster, thereby the productivity is higher, therefore decreasing cost.
- Cylinder adopt high accurate, anti-friction hard material, which is duralumin, without rust, lower friction, lower noise and loading is faster, thereby reducing the weld spatter.
- Our machining equipment is more advance, fine workmanship, so welding machine's precision is higher.
- Lower loose weld rate, less welding dregs.
- It is easy to operate machine. Performance of machine is more steady, can be used 24 hours, lifetime 15 years.
- Electrode: With CuCrZr materials, very anti-friction. By means of water cooling, longer service life.
- Compressed air system: Equipment is installed air processor which is used for clean the compressed air, and with muffler to reduce the noise. Also it is with compressed air tank to stabilize the air pressure.
- Cooling water system: There are transformers cooling, up electrode cooling, lower electrode cooling and other copper block cooling. It come true the water distribution by flowmeter. Each flowmeter can be adjusted individually to make machine working normal, without damages
Be widely used in wire mesh, storage rack, protecting fence etc.
Our service:
Pre-sales
1) Inquiry and consulting support. All will be replied in 12 hours.
After-Sales
1) Training your workers how to install the machine, how to use the machine.
2) Engineers available to service machinery overseas
3) 1-year guarantee ( free maintain in a year)
4) Replacement parts and other accessories provided
Factory info:
A. Our company advantages:
1. we are in this line more than 20 years, professional.
2. There are almost 200 staff, two factories more than 10,000 square meters, exceeding hundred million RMB turnover each year.
B. Our machine advantages:
1. Welding transformer energy saving and environment protection, small volume. And it is made by pure copper, superior cooling water structure, so the power factor is higher.
2. The pneumatic cylinder shell is superior quality aluminum alloy, piston rods are made by CNC center and grind. So it is smaller noise, no rust, faster speed and lower failure rate.
3. Other sourcing parts like the electric element, pneumatic parts all are superior brands in China or Imported.
4. Lower failure rate, no need repairing within 3 years usually.
5. Our machine is beautiful and handsome
You can watch videos on youtube: nbxinchang.en.made-in-china.com
FAQ
1.What's the trade terms?
A: FOB, CNF, CIF
2.What's the payment term?
A: a. T/T 30% as deposit, 70% should be paid before delivery.
b. L/C at sight
3. What's the delivery time?
A: 10-15 days after received 30% deposit.
4. What's the package way?
A: Wooden case
5. Which shipment port?
A: Ningbo port
6.How long is the guarantee?
A: For one year after customer received the machine.
Welcome your inquiry ! And question please contact with us !
Mr.Bob Zhang
Sales Engineer
Ningbo Xinchang Machinery Co.,Ltd
Youtube videos: nbxinchang.en.made-in-china.com
Mobile/+86 158 8800 2607
- This machine is multi head type structure, can weld multi-spot for one time.
- Control system: Microcomputer control, can store 15 sets welding schedule which can be adjust independently, very easy to achieve one or more electrode welding parameters independently djusted so as to achieve welding requirements for different sizes, different shapes products.
- Users can set by himself action sequence, number and welding schedule of cylinder, to achieve the welding requirements on different products.
- Large screen display intuitive and clear.
- Data set and adjusted by touch switch, easy and fast.
- Machine body of thick steel sheet, not easy to deformation, good rigidity.
- Water cooling transformer: Use silicon sheets of 15000 gauss permeability to pile up. There is cooling water in inside, using full copper alloy core not aluminum, reducing impedance, improving the utilization of power, 20% duty cycle to ensure the requirement of long time welding, big output power. The useful lifetime is longer, noise is smaller, structure is more compact and reasonable.
- Fast solenoid valve, making welding speed faster, thereby the productivity is higher, therefore decreasing cost.
- Cylinder adopt high accurate, anti-friction hard material, which is duralumin, without rust, lower friction, lower noise and loading is faster, thereby reducing the weld spatter.
- Our machining equipment is more advance, fine workmanship, so welding machine's precision is higher.
- Lower loose weld rate, less welding dregs.
- It is easy to operate machine. Performance of machine is more steady, can be used 24 hours, lifetime 15 years.
- Electrode: With CuCrZr materials, very anti-friction. By means of water cooling, longer service life.
- Compressed air system: Equipment is installed air processor which is used for clean the compressed air, and with muffler to reduce the noise. Also it is with compressed air tank to stabilize the air pressure.
- Cooling water system: There are transformers cooling, up electrode cooling, lower electrode cooling and other copper block cooling. It come true the water distribution by flowmeter. Each flowmeter can be adjusted individually to make machine working normal, without damages
Be widely used in wire mesh, storage rack, protecting fence etc.
| Model Item | DNW3-2x100-C | DNW3-2x150-C | DNW3-2x200-C | |
| Rated capacity | KVA | 2x100 | 2x150 | 2x200 |
| Rated primary vtg. | V | 380 | 380 | 380 |
| Rated frequency | HZ | 50 | 50 | 50 |
| Max short circuit current | KA | 30 | 36 | 42 |
| Duty cycle | % | 20 | 20 | 20 |
| Max forging pressure | N | 5315 | 5315 | 5315 |
| Upper electrode stroke | mm | 60 | 60 | 60 |
| Lower electrode stroke | mm | 40 | 40 | 40 |
| Cooling water flux | L/min | 6 | 6 | 6 |
| Width of upper electrode | mm | 90 | 90 | 90 |
| Max welding width (C) " C" is stand for " Max welding width" | mm | 800-4000 | 800-4000 | 800-4000 |
Pre-sales
1) Inquiry and consulting support. All will be replied in 12 hours.
After-Sales
1) Training your workers how to install the machine, how to use the machine.
2) Engineers available to service machinery overseas
3) 1-year guarantee ( free maintain in a year)
4) Replacement parts and other accessories provided
Factory info:
A. Our company advantages:
1. we are in this line more than 20 years, professional.
2. There are almost 200 staff, two factories more than 10,000 square meters, exceeding hundred million RMB turnover each year.
B. Our machine advantages:
1. Welding transformer energy saving and environment protection, small volume. And it is made by pure copper, superior cooling water structure, so the power factor is higher.
2. The pneumatic cylinder shell is superior quality aluminum alloy, piston rods are made by CNC center and grind. So it is smaller noise, no rust, faster speed and lower failure rate.
3. Other sourcing parts like the electric element, pneumatic parts all are superior brands in China or Imported.
4. Lower failure rate, no need repairing within 3 years usually.
5. Our machine is beautiful and handsome
You can watch videos on youtube: nbxinchang.en.made-in-china.com
FAQ
1.What's the trade terms?
A: FOB, CNF, CIF
2.What's the payment term?
A: a. T/T 30% as deposit, 70% should be paid before delivery.
b. L/C at sight
3. What's the delivery time?
A: 10-15 days after received 30% deposit.
4. What's the package way?
A: Wooden case
5. Which shipment port?
A: Ningbo port
6.How long is the guarantee?
A: For one year after customer received the machine.
Welcome your inquiry ! And question please contact with us !
Mr.Bob Zhang
Sales Engineer
Ningbo Xinchang Machinery Co.,Ltd
Youtube videos: nbxinchang.en.made-in-china.com
Mobile/+86 158 8800 2607
Send Message
