Model NO.
BWJ-50
Welding Tilter Type
Flexible Combination
Condition
New
Model No.
Bwj-50
Loading Weight
5000kg
Rotating Speed
0.1~1.2r/Min
Flip Center Height
800mm
Flip Angle
0-120dgr
Table Diameter
1800mm
Eccentricity
300mm
Center of Gravity
300mm
Rotating Motor
2.2kw
Flip Motor
3kw
Input Power
380V
Lead Time
15 Days
Exported to
Russia,Brazil,Greece,Poland
Tilting Mode
Oil Pressure
Rotation Motor
1500W
Transport Package
Standard
Trademark
Lemar
Origin
Jiangsu, China
HS Code
8428909090
Type:
Welding Turntable
Structure:
Platform
Max Eccentricity Distance:
150mm
Tilting Angle:
0-90°
Voltage:
380V
Welding Turning Rolls Type:
Adjustable
5 Ton Elevating height adjustable rotary positioner for welding
Hydraulic hydraulic lifting welding table is made of whole 45# steel plate with a diameter of φ1000mm- and a thickness of 28mm. Assume
There are 3-6 T-slots, and the clamping of various specifications of workpieces can be realized through the T-slot configuration fixture.
There is also a set of concentric circles on the panel of the Welding turning table, with diameters from small to large, evenly distributed from the inside to the outside, which is convenient for customers to set up the tooling
Hydraulic hydraulic lifting welding table is made of whole 45# steel plate with a diameter of φ1000mm- and a thickness of 28mm. Assume
There are 3-6 T-slots, and the clamping of various specifications of workpieces can be realized through the T-slot configuration fixture.
There is also a set of concentric circles on the panel of the Welding turning table, with diameters from small to large, evenly distributed from the inside to the outside, which is convenient for customers to set up the tooling
| Maximum load capacity | 5,000kg |
| Table diameter | 1800mm |
| Speed | 0.05 - 0.5 rpm |
| Rotary motor | 1.5KW |
| Tilt motor | 3KW |
| Tilt angle | 0-135° |
| Welding table height | customized |
| Power | 380V 50HZ |
1. Welding positioner with clamping chuck set
2. A foot switch
3. A set of instruction manuals
4. Two fuses
5. Warranty Card
Instructions for use
1. The Welding positioner turning table must be well grounded.
2. The working voltage of the Rotary lifting welding table is DC 380V/50HZ. Do not connect to other voltage grids, otherwise the equipment will not work normally or the electrical appliances inside the control box will be burned.
3. There is electricity inside the control box, and non-professionals are not allowed to open it without authorization to avoid the danger of electric shock.
Send Message
