Model NO.
20k 1800w
Content
Generator, Transducer, Horn
Other Application
Plastic PVC / PP / PE Material Sealing
Transport Package
Carton Packaging
Trademark
DIZO
Origin
China
HS Code
8515809090
Production Capacity
100
Application:
PP ABS Plastic
Cooling Way:
Air Cooling
Control:
Automatic
Electric Current:
AC
Style:
Vertical
Type:
Ultrasonic
| Model | NC-2600M |
| Frequency | 15KHZ |
| Power | 2600W |
| Voltage | 220V |
| Max output power | 2.6kw |
| Welding Area | Φ210 |
| packing size W*H*D(CM) | Machine Frame:400*650*1100 Generater:460*500*180 |
| NW(KG) | 110KG |
Certifica
FAQ
Compared with other welding methods, ultrasonic welding can accept thermoplastic materials. It has many advantages, including process reliability and repeatability, lower energy use than other bonding technologies, saving materials and corresponding labor costs. What are the common problems in ultrasonic welding? What are the specific aspects?
Ultrasonic problem : abnormal heating of ultrasonic mold
When the ultrasonic mold is working, there will be a certain heating phenomenon, which is caused by the mechanical energy loss of the material itself and the heat conduction of ultrasonic objects. Whether the heating of ultrasonic mold is normal or not is judged as: when the ultrasonic mold is not loaded (i.e. not contacting the workpiece), the ultrasonic wave is continuously emitted for more than half an hour, and the temperature should not exceed 50-70 ºC. If the heat is damaged, it is proved that the ultrasonic mold has been damaged or the material is unqualified and needs to be replaced; if the mold temperature is too high, it is usually accompanied by abnormal high ultrasonic current;
Send Message
