Model NO.
DRBY315
Electric Current
AC
Model
Drby315
Applicable Material
PE, PPR, Pb, PVDF
Clamp Qty
4
Pipe Sizes Range
Dn160-Dn315
Input Voltage
220V
Milling Tool Power
1.1 Kw
Heating Plate Power
2.8 Kw
Hydraulic Station Power
0.75 Kw
Heating Plate Max.Temp
270ºC
Temperature Deviation
±3ºC
Operation Temperature
220ºC
Pressure Adjustable Range
0-4.5 MPa
Weight
189 Kgs
Transport Package
Wooden Case
Specification
DRBY315
Trademark
GERAT WALL
Origin
China
HS Code
84778000
Cooling Way:
Air Cooling
Control:
Hydraulic
Frequency Range:
High Frequency
Hydraulic Butt Welding Machine 
Product Introduction :
1. Suit for Butt Welding of PE, PPR, PP, PB, PVDF, HDPE Pipe
2. made of the material of light weight and high strength
3. Labor Saving and high working efficiency .
4. The main components made of aluminum casting with the advantages of light weight, strong and smooth.
Technical Parameter :
Steps of Butt Welding :
1. fix the pipe or spigot end of pipe fitting with clamps of the welding machine
2. clean the spigot end of pipe fitting
3. cut the ends of pipe to get the smooth face
4. put the heating plate between the ends of two pipes and apply the pressure
Product Introduction :
1. Suit for Butt Welding of PE, PPR, PP, PB, PVDF, HDPE Pipe
2. made of the material of light weight and high strength
3. Labor Saving and high working efficiency .
4. The main components made of aluminum casting with the advantages of light weight, strong and smooth.
Technical Parameter :
| Model: DRBY315 | |
| Heating Plate Max.Temp | 299ºC |
| Temperature Deviation | ± 7ºC |
| Operation Temperature | 220ºC |
| Pressure Adjustable Range | 0-6.3 Mpa |
| Applicable Material | PE, PPR, PB, PVDF |
| Model | DRB160T2 |
| Pipe Size Range (mm) | 160,180,200,225,250,280,315 |
| Input Voltage | 220V |
| Milling Tool Power | 1.1 KW |
| Heating Plate Power | 3.5 KW |
| Hydraulic Station Power | 0.75 KW |
| G.W. | 225 KGS |
| The weight of machine rack, milling cutter and other accessories is included in the above gross weight. | |
Steps of Butt Welding :
1. fix the pipe or spigot end of pipe fitting with clamps of the welding machine
2. clean the spigot end of pipe fitting
3. cut the ends of pipe to get the smooth face
4. put the heating plate between the ends of two pipes and apply the pressure
Send Message
