Model NO.
MP25
Frequency Range
Custom Made
Electric Current
Custom Made
Type
Melt Thru
Function
Edge Milling and Butt Welding
Welding Flux
Double Layer Special
Welding Mode
One Side Welding and Both Sides Forming
Working Style
Automatic
Welding Technology
Submerged Arc Welding
Steel Plate Clamping
Hydraulic Drive Pressing Blocking
Welding Cooling
Circulating Water Cooling
Patent Technique
Melt Thru Fully Penetration Welding
Working Speed
Inverter Control
Operation
HMI Human Machine Interface
Edge Beveling
Flame Triple Cutting
Transport Package
Disassembled and Packed
Specification
For plate width up to 5000mm, thickness 40mm
Trademark
Wuxi JACK and AMASS
Origin
Wuxi, China
Welding Range:
Custom Made
Cooling Way:
Water Cooling
Control:
Automatic
A. Usage and Application of Plate Butt Joint Welding Machine:
1. MP series Plate Butt Joint Welding Machine is for making flat butt joint on 2 pieces of metal plates into one piece of larger size integral plate, in the range of various thickness, especially carbon steel plate;
2. Workpieces Applicable for Plate Butt Joint Welding Machine:
1) Max. Plate thickness is from 6mm to 40mm;
2) Plate width is up to 5000mm;
3) Plate length is designated by customer;
3. Welding technology adopted in Plate Butt Joint Welding Machine is Wuxi JACK (Wuxi AMASS) patent Melt-Thru, which means "One side welding, and both sides seam formation".
B. Advantages of Wuxi JACK (Wuxi AMASS) Plate Butt Joint Welding Machine:
This is superior product of Wuxi JACK (Wuxi AMASS). Below slides give graphical introduction on our strong points:
C. Main Units of Wuxi JACK Plate Butt Joint Welding Machine:
1. Mechanical main frame of the Flat Butt Welding Machine:
1) Stationary gantry frame;
2) Both side of the gantry frame are installed with function units:
The steel plate incoming side is flame triple system, for the purpose of making beveling on edges of steel plate;The steel plate outgoing side is melt-thru butt welding system, with V slot working table;
2. Triple Flame Cutting System:
Its function is making beveling on edges of steel plate, similar to CG series Flame Triple Cutting Machine, or XBJ and SXBJ series Edge Milling Machine;3. Melt-Thru Butt Welding System:
The welding technology adopted here is Wuxi JACK patent exclusively owned Melt-Thru, which means "One side welding, and both sides welding seam formation".4. Input and Output Conveyor
5. Electric Control System;
6. Hydraulic Driving System;
7. Cooling Water Recirculating System
D. Models and Technical Parameters of Wuxi JACK Plate Butt Joint Welding Machine:
| No. | Parameter | MP25 Plate Butt Joint Welding Machine |
| 1 | Fitting Plate Thickness and Material | 6 ~ 40mm for SAW, and less than 6mm for GMAW (Low carbon steel, Stainless steel or Al alloy) |
| 2 | Welding Thickness without Beveling | 6 ~ 15mm |
| 3 | Max. Width of Metal Plates (Or Length of Butt Welding Seam) | 2500 mm |
| 4 | Welding Velocity | Adjustable Stepless within 200 ~ 1200mm/min Controlled with A.C. Inverter control |
| 5 | Triple Cutting Velocity | Adjustable Stepless within 100 ~ 800mm/min Controlled with A.C. Inverter control |
| 6 | Welding style | Submerged Arc Welding Butt welding, melt through technique |
| 7 | Workpiece Length | 6000 ~ 15000 mm (Can be special made) |
1. Q: What is the relationship between Wuxi AMASS and Wuxi JACK?
A: Wuxi AMASS and Wuxi JACK are the same company: Wuxi AMASS is wholly owned subsidiary of Wuxi JACK, for overseas trading Wuxi JACK products;2. Q: What is the nature of your company?
3. Q: What is the range of your company product?
Main products of our company include:
1) Steel structure production equipment (H Beam/ BOX Beam/ T Beam);
2) Edge Milling Machine;
3) Structure member Beam end face milling machine;
4) CNC Plate Cutting Machine;
5) CNC Pipe Cutting Machine;
6) Various kinds of conventional and special design welding equipment and machine;
7) Various kinds of conventional and special design Straightening machine, etc.;
4. Q: What is the strength of your company?
1) Wuxi JACK was founded by 3 senior engineers 15 years ago;
2) Engineering team of our company has over 20 years experience on Welding and Cutting industry;
3) Operation manager has 14 years experience working in an American Fortune Global 500 Dow Jones Industrial Index Company as senior Project Manager;
4) The competitive edge of our company is special design products based on customer demand.
5. Q: What are service terms of your company?
1) During business negation:
a) Make technical proposal and quotation;
b) Answering customer questions;
c) Make final contract and technical agreement;
2) During order to delivery value chain:
a) Design, validate, and manufacture products for customers;
b) Inform progress of manufacture to customers;
c) Arrangement for package and shipment of products to customers;
3) After sale service:
a) Technical support on installation and commissioning at customer site;
b) 1 year guarantee from the date of acceptance;
c) Feedback any technical issues within 4 hours upon getting the notice;
6. Q: Where is location of your company?
Send Message
