Model NO.
V250CNC
Power
Electric
Warranty
2 Years
Suitable Materials
PP PVC PVDF PE
Operation Way
Automatic
Voltage
220V ( *110V )
Certificate
CE,ISO
Transport Package
Plywood Box
Specification
3 plywood boxes
Trademark
RIYANG
Origin
China
HS Code
8515219900
Production Capacity
500 Units / Month
Application:
Infrastructure, Contruction
Cooling Way:
Air Cooling
Control:
Automatic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
RIYANG BUTT FUSION WELDING MACHINE V250 CNC
The RIYANG V-CNC series automatic hydraulic butt welding machines are applied to joint PE, PP, PPR and PVDF pipes and moulded fittings. Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.
| Technical Parameters | V250 CNC |
| Welding Range O.D. | 90-250 mm (*75mm) |
| Power Supply | 220V±10%, 50/60Hz |
| Rated Power | 5.25 kw |
| Working Pressure Range | 0-80 bar |
| Piston Area | 10.99 cm2 |
| Temperature Range | Max. 320ºC |
| Packing dimension | 830*520*500 mm |
| 560*540*600 mm | |
| 650*340*380 mm | |
| Gross Weight | 192 kgs |
RIYANG V-CNC series Characteristics
| Welding control system | Fully monitored by CNC control unit |
| Data logging capacity | 2000 reports |
| Welding monitoring system | Ambient temperature, input voltage, heating temperature, welding pressure, welding times, heating operation, trimming operation, memory control |
| Welding standard | DVS, ISO, WIS, UNI and others upon request |
| Languages | Available upon request |
| Approval certification | CE, ISO9001:2008 |
| Warranty period | 2 years |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont from USA for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
Featured by
- We use Dupont from USA for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.
And a stable support
Automatic Control Box
Featured by
- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient hydraulic power during welding procedure, but also it makes sure the precise control. And most importantly, it greatly reduce the weight of control box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic control unit, including sockets for trimmer tool and heating plate. No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.
- All RIYANG V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrade are available for remote control.
- When heating plate hook up with machine chassis, inserting or release the heater will be controlled remotely by hydraulic unit, which is same as trimmer. These characteristics prevent the operators from being injured.
Featured by
- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. Fully encased control box makes the protection level up to IP 54.
- Due to the unique powertrain, it could not only create sufficient hydraulic power during welding procedure, but also it makes sure the precise control. And most importantly, it greatly reduce the weight of control box. And the servo-motor applied significantly reduce the failure possibility and maintenance cost.
- All connections sockets are located at the back of hydraulic control unit, including sockets for trimmer tool and heating plate. No additional power distributor is needed.
- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.
- All RIYANG V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrade are available for remote control.
- When heating plate hook up with machine chassis, inserting or release the heater will be controlled remotely by hydraulic unit, which is same as trimmer. These characteristics prevent the operators from being injured.
You may be concerned:(Click the Iterm name)
V160 Manual butt fusion welding machine V1000 Butt fusion welding machine with Crane Roller Support
Send Message
