Model NO.
D59R-2430-150-20L-AV0.6/0.8
Frequency Range
Low Frequency
Electric Current
DC
Type
MIG Mag Automatic Wire Feeder
Current
Direct Current
Motor Diameter
59mm
Voltage
DC24V
Power
30W
No Load Speed
150rpm
Stall Torque
13n.M
Stall Current
10A
Wire Feeder Frame Type
20L / 20lp
Wire Feeder Roll Size
30mm/10mm
Feed Wire Diameter
0.6mm 0.8mm 0.9mm 1.0mm
Apply for Wire Roll Weight
15kg, 5kg
Maximum Feed Speed
13m/Min
No-Load Current
1.2A
Mini Steady Operation Voltage in Load
DC4.5V
Transport Package
Carton or Plastic Pallet
Specification
CE, CCC
Trademark
WEWIN
Origin
China
HS Code
85013100
Production Capacity
60000/Month
Cooling Way:
Air Cooling
Shielding Gas:
Argon Gas
Control:
Automatic
Automatic Wire Feeder Dc 12V 24V Mini Welding Wire Feeding Assembly for Mig / Mag Welder
Model:D59R-2430-150-20L-AV0.6/0.8
This wire feeder cna be used for the welding machine which the welding current is less than 250A,the welding machine can work at spot weld and continue weld.
Wire Feeder Specialty
1.This wire feeder use our own designed motor which is special for welding machine with stable performance, long life time and high torque, and less noise.
2.The wire feeder frame is designed together with the Europe connector.
3.Wire feeder motor can choose our another small motor D49R or D49L.
4.Feeder speed can required to 180rpm. That means the feeder speed will be at 16m/min.
5.Motor can be fixed encoder, hall sensor or opto switch.
Motor Paramenters
Motor type: D59R
Motor voltage: DC24V
Motor output power: 30W
No-load speed: 150RPM
No-load current: 1.2A
Stall torque: 13N. M
Stall current: 10A
Wire feeder frame type: 20L
Wire feeder roll size: 30mm/10mm
Maximum feed speed: 13M/min
Model:D59R-2430-150-20L-AV0.6/0.8
This wire feeder cna be used for the welding machine which the welding current is less than 250A,the welding machine can work at spot weld and continue weld.
Wire Feeder Specialty
1.This wire feeder use our own designed motor which is special for welding machine with stable performance, long life time and high torque, and less noise.
2.The wire feeder frame is designed together with the Europe connector.
3.Wire feeder motor can choose our another small motor D49R or D49L.
4.Feeder speed can required to 180rpm. That means the feeder speed will be at 16m/min.
5.Motor can be fixed encoder, hall sensor or opto switch.
Motor Paramenters
Motor type: D59R
Motor voltage: DC24V
Motor output power: 30W
No-load speed: 150RPM
No-load current: 1.2A
Stall torque: 13N. M
Stall current: 10A
Wire feeder frame type: 20L
Wire feeder roll size: 30mm/10mm
Maximum feed speed: 13M/min
Send Message
