Model NO.
D49S-2420-150-301DV0.6/0.8
Voltage
24V
Welding Turning Rolls Type
Adjustable
Welding Tilter Type
Flexible Combination
Condition
New
Motor Type
D49s/D49sr
Wire Feeder Type
MIG Mag Automatic Wire Feeder
Wire Feeder
Wire Feeder for MIG
Motor Voltage
DC24V
Motor Output Power
20W
Noload Speed
150rpm
Noload Current
0.8A
Stall Torque
7.5nm
Stall Current
8A
Wire Feeder Fram Type
301d
Wire Feeder Roll Size
30*22mm
Apply for Wire Roll Weight
15kg, 5kg
Feed Wire Diameter
0.6mm 0.8mm 0.9mm 1.0mm
Max Feed Speed
13m/Min
Mini Steady Operation Voltage in Load
DC4.5V
Transport Package
Carton
Specification
CE, CCC
Trademark
WEWIN
Origin
China
HS Code
8501310000
Production Capacity
60000/Month
Type:
Welding Fixture
Structure:
Platform
Rotaion Speed:
150rpm
Automatic Mig Welding Machine 13m/min 150RPM Mig Welder Wire Drive Feed
This wire feeder can be used for the welding machine which the welding current is less than 200A,the welding machine can work at spot weld and continu weld.
Product Specialty
1.This wire feeder use our own design motor which is special for welding machine with a gear ratio is 20/1, it works at low noise and high torque.
2.The wire feeder frame dimension is designed as the 40 series frame, so it can be exchanged for them.
3.Wire feeder motor can choose our another small motor D49R or D49L.
4.Feeder speed can be required to 180rpm. It lets feeder speed reaches 16m/min.
5.Motor can be fixed encoder, hall sensor or opto sensor.
Motor Paramenters
This wire feeder can be used for the welding machine which the welding current is less than 200A,the welding machine can work at spot weld and continu weld.
Product Specialty
1.This wire feeder use our own design motor which is special for welding machine with a gear ratio is 20/1, it works at low noise and high torque.
2.The wire feeder frame dimension is designed as the 40 series frame, so it can be exchanged for them.
3.Wire feeder motor can choose our another small motor D49R or D49L.
4.Feeder speed can be required to 180rpm. It lets feeder speed reaches 16m/min.
5.Motor can be fixed encoder, hall sensor or opto sensor.
Motor Paramenters
| Motor type | D49L |
| Motor voltage | DC24V |
| Motor output | 20W |
| No load speed | 150rpm |
| No load current | 0.8A |
| Stall torque | 7.5Nm |
| Stall current | 8A |
| Wire feeder frame type | 301D |
| Wire feeder roll size | 30mm*22mm |
| Maximum feed speed | 13m/min |
| Feed wire diameter | 1.2mm / 1.6mm |
| Welding wire | for aluminium |
Send Message
