Model NO.
D76R-2495-220-504ABV1.0/1.2
Frequency Range
Low Frequency
Electric Current
DC
Wire Feeder Type
MIG Mag Automatic Wire Feeder
Wire Feeder
Aluminium Wire Feeder for MIG
Motor Type
D76L
Moto Voltage
DC24V
Motor Output Power
95W
No-Load Speed
220rpm
No-Load Current
1.8A
Stall Torque
24n.M
Stall Current
20A
Wire Feeder Fram Type
504A
Wire Feeder Roll Size
40*32mm
Apply for Wire Roll Weight
15kg, 5kg
Feed Wire Diameter
0.6mm 0.8mm 0.9mm 1.0mm 1.2mm
Max Feed Speed
26m/Min
Mini Steady Operation Voltage in Load
DC4.5V
Transport Package
Carton or Plastic Pallet
Specification
CE, CCC
Trademark
WEWIN
Origin
China
HS Code
85013100
Production Capacity
60000/Month
Cooling Way:
Water Cooling
Shielding Gas:
Argon Gas
Control:
Automatic
504A Aluminium Casting Feed Frame 24V Wire Feeder in Mig Welders
This wire feeder can be used for the welding machine which the welding current is less than 500A,the welding machine can work at spot weld and continue weld.
Stent used four gears (1.25 model) drive, only 22mmx 30mmx10mm drive roller can be installed send.
Wire Feeder Specialty
1.This wire feeder use our own designed motor which is special for welding machine with a gear ratio is 20/1,it works at low noise and high torque.
2.The standard motor for this kinds wire feeder is 95W 220RPM,also you can aks the 65W 220RPM motor.
3.The roll only use the 40*32mm rolls,motor can be fix encoder,hall sensor and opto-switch.
This wire feeder can be used for the welding machine which the welding current is less than 500A,the welding machine can work at spot weld and continue weld.
Stent used four gears (1.25 model) drive, only 22mmx 30mmx10mm drive roller can be installed send.
Wire Feeder Specialty
1.This wire feeder use our own designed motor which is special for welding machine with a gear ratio is 20/1,it works at low noise and high torque.
2.The standard motor for this kinds wire feeder is 95W 220RPM,also you can aks the 65W 220RPM motor.
3.The roll only use the 40*32mm rolls,motor can be fix encoder,hall sensor and opto-switch.
Send Message
