Model NO.
QO-5060
Frequency Range
High Frequency
Electric Current
AC
Style
Vertical
Power
Pneumatic
Platen Size
300*500mm
Power Supply
220V 50Hz
Transport Package
Wood Case
Trademark
QIAO
Origin
Shenzhen
HS Code
8468800000
Production Capacity
500
Application:
Household Appliances, Auto Part
Cooling Way:
Air Cooling
Control:
Automatic
Welding principle:
Hot plate welding is the process of joining two parts of a plastic component using heated plate. Hot plate welding, also known as mirror, platen, or butt welding, is used for welding injection-molded components, for example in automotive applications, and extensively in joining plastic.
The process uses a heated, metal plate to heat and melt the interface surfaces of the thermoplastic comonents. Once the component interfaces are sufficiently heated, the hot plate is removed and the components are brought into contact to form the weld. An axial load is applied to the components during both the heating and joining phases of the welding process.
Scope of application:
It is mainly used for welding of thermoplastic materials such as PE, PP, ABS, nylon, acrylic, POM, etc. and plastic parts with large and complex weld area. As such car lights, car water tanks, washing machine water plugs, batteries, steam irons, car tails, car dashboards, board, dust buckets, washing machine balance ring lights, And the welding of other irregular shaped plastic products....etc.
Machine introduction:
The hot plate machine welds the plastic components through a temperature-controlled heating plate. When heating, the heating plate device is used between two plastic parts. When the workpiece is in close contact with the hot plate, the plastic begins to melt. After the heat time elapses, the material is heated under the heating element, the molecules reach the molten state, and the heating plate is retracted. In a short time, the two plastic parts are pressed under a certain pressure, and are integrated into each other by molecular motion, and after cooling for a certain period of time, The two plastic parts will be fused together and achieve a certain welding strength, thus achieving the welding function.
Machine features:
1.Easy to learn and operate.
2. The transmission system is driven by pneumatic, hydraulic drive or servo motor.
3. Can be applied to workpieces of different sizes without area limitation
4. Can Perfect welding for irregular workpieces without any other consumables
5. The welding surface can allow the plastic allowance to be compensated, and the welding strength is guaranteed.
6. According to the needs of various materials, the welding procedure can be adjusted, and the design is smart enough to meet the production needs.
7. It adopts man-machine interface and PLC control system, which is intuitive and convenient to operate.
8. Digital display temperature controller, the welding temperature is more stable
9. Fast speed, labor saving and high production efficiency
Specification parameter:
Related Products:
Contact us
Hot plate welding is the process of joining two parts of a plastic component using heated plate. Hot plate welding, also known as mirror, platen, or butt welding, is used for welding injection-molded components, for example in automotive applications, and extensively in joining plastic.
The process uses a heated, metal plate to heat and melt the interface surfaces of the thermoplastic comonents. Once the component interfaces are sufficiently heated, the hot plate is removed and the components are brought into contact to form the weld. An axial load is applied to the components during both the heating and joining phases of the welding process.
Scope of application:
It is mainly used for welding of thermoplastic materials such as PE, PP, ABS, nylon, acrylic, POM, etc. and plastic parts with large and complex weld area. As such car lights, car water tanks, washing machine water plugs, batteries, steam irons, car tails, car dashboards, board, dust buckets, washing machine balance ring lights, And the welding of other irregular shaped plastic products....etc.
Machine introduction:
The hot plate machine welds the plastic components through a temperature-controlled heating plate. When heating, the heating plate device is used between two plastic parts. When the workpiece is in close contact with the hot plate, the plastic begins to melt. After the heat time elapses, the material is heated under the heating element, the molecules reach the molten state, and the heating plate is retracted. In a short time, the two plastic parts are pressed under a certain pressure, and are integrated into each other by molecular motion, and after cooling for a certain period of time, The two plastic parts will be fused together and achieve a certain welding strength, thus achieving the welding function.
Machine features:
1.Easy to learn and operate.
2. The transmission system is driven by pneumatic, hydraulic drive or servo motor.
3. Can be applied to workpieces of different sizes without area limitation
4. Can Perfect welding for irregular workpieces without any other consumables
5. The welding surface can allow the plastic allowance to be compensated, and the welding strength is guaranteed.
6. According to the needs of various materials, the welding procedure can be adjusted, and the design is smart enough to meet the production needs.
7. It adopts man-machine interface and PLC control system, which is intuitive and convenient to operate.
8. Digital display temperature controller, the welding temperature is more stable
9. Fast speed, labor saving and high production efficiency
Specification parameter:
| Model | QO-4040RB | QO-5070RB |
| Table size | 400*400mm | 500*700mm |
| Transmission system | Pneumatic / hydraulic / servo drive optional | |
| Power supply | AC 220V or 380V 50HZ | |
| Output power | 10-70KW | |
| Temperature control | 0-3000C | |
| Input pressure | 0.6-1.0Mpa | |
| Control System | PLC control system | |
| Total size | ||
| Total net weight | 500kg | 600kg |
Related Products:
Contact us
Send Message
