Excellent Auto Repair Equipment Intelligent 3D Wheel Alignment, Wheel Alignment, 3D Camera Auto Beam Alignment

Main Features
1. Newly developed design;

2. Space saving with newly design cabinet;

3. Mini black tech target;

4. Auto tracking system;

5. 4 points wheel clamp;

6. Dual-display system;

7. LED intelligent display system;

8. 5.0 M HD camera;

9.Patented SMART WINDOW.

Detail Functions
1.5.0M HD camera
High definition and high speed USB3.0 data processing system
2. Manual column aid
The program can guide the operators to adjust the best position of camera crossbeam to finish alignment measurement.


3.4 points wheel clamp
Fits steel or specialty rim with run-flat and flange-guard tires;
Expands  adaptor range up to 27 inches.(optional)


4.Patented SMART WINDOW
Patented mini display screen , monitoring the real-time measurement and operating independently without assistance .
5.Mini aluminium black tech target  
The BLACK TECH plate can reduce the influence of sidelight to improve the clarity of the image and ensure the accuracy of measurement . Made of aluminuim material ,ultral thin and light .(Target size:5.3 inches&6.9 inches)
6.2-post and Mini Scissor Lift Jack-up Adjustment
It can measure on the ground and adjust in higher position, as well as support the measurement and adjustment on 2-post and mini scissor lift by manual camera beam lifting system.
7.i-Toe1
No need to use wheel holder and adjust repeatedly, it can make sure the steering wheel is straight after every toe adjustment with the function of automatic correction of internal arithmetic.
8.i-Toe2
More special cars can be aligned,and it not only reduces the redundant steps in front toe adjustments but also adjusts front toe easily and fast.
9.Image stabilizing system
The software can judge intelligently that the camera will take the key pictures when the image is stable,and there is no need for the second pushing measurement because of the accident.

10.Two operation modes
Manual mode guides operators to do the smooth alignment procedures, and automatic mode finishes quic alignment and adjustment with auto steps skipping.

Measurement Functions
Basic Measurement:
TOE,CAMBER,CASTER,KINGPIN,INCLINATION,SETBACK,THRUST ANGLE ,INCLUDED ANGLE.

Additional Fuctions:
MAX TRUNING ANGLE,TOE-OUT-ON-TURN,WHEEL ROLL RADUIS MEASUREMENT,TIRE RATATIONS RATE,AXLE OFFSET ,WHEEL OFFSET,TRACK WIDTH/WHEELBASE,VEHICLE LIFTING MEASUREMENT,ALIGNMENT PLATFORM LEVEL DETECTION,TOE CONSTANT VALUE MEASUREMENT,TWO-WHEEL MEASUREMENT(OPTIONAL),RIDE HEIGHT MEASUREMENT(OPTIONAL

Technical Parameters
 
Work Station Requirement


Company Introduction



Company Certification